Shel wrote:
> The 28mm and 35mm hoods are of different designs, with the 28mm fitting
> around the outside of the lens barrel and being secured with a clutch
> while the 35mm screws into the front element threads. Which way does
> the 24mm hood attach?
Ooops, forgot that I use my 28mm hood on both the 28 & the 35
My 35 is the 49mm f2 version.
In any case, the 24mm hood is like the 28mm - slip on and then
turn to clutch/tighten some sort of sleeve-clamp around the lens.
As can be seen in the picture, it obscures the SPII quite a bit.
The 28mm & hood seems tiny in comparison.
Bill
---------------------------------------------------------
Bill D. Casselberry ; Photography on the Oregon Coast
http://www.orednet.org/~bcasselb
[EMAIL PROTECTED]
---------------------------------------------------------
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
