The negative stage does not move on the 23CII when adjusting for different formats, the light source and condenser lenses above it do the moving.
Thanks, Ed http://lightandsilver.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Rittenhouse > Sent: Tuesday, January 01, 2002 4:50 PM > To: [EMAIL PROTECTED] > Subject: Re: Questions for Beseler 23CII Users > > > 'Cept that don't work with a Beseler condenser head. The > Beseler moves the negative stage up and down the cone of > light until it just covers the negative area. The enlarger > works pretty well if you have the neg higher up than optimum > but you lose some light intensity, if the neg is to lower it > won't have enough coverage. > > Ciao, > graywolf > [EMAIL PROTECTED] > > > > ----- Original Message ----- > From: William Robb <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 01, 2002 2:21 PM > Subject: Re: Questions for Beseler 23CII Users > > > > ----- Original Message ----- > > From: "Shel Belinkoff" > > Subject: Re: Questions for Beseler 23CII Users > > > > > > > OK, I understand the math ... but what is the diffuser? How > > do I > > > measure it? Where do I find it? > > > > On a colour head, the diffuser is the white plastic or opal > glass that > > sits just above the negative carrier. Condensor heads, by > definition > > don't have diffuser discs, but you can measure the diameter of the > > bottom condensor to get an approximation of the coverage the light > > source is capable of. William Robb > > - > > This message is from the Pentax-Discuss Mail List. To unsubscribe, > > go to http://www.pdml.net and follow the directions. Don't forget to > > visit the Pentax Users' Gallery at http://pug.komkon.org . > - > This message is from the Pentax-Discuss Mail List. To > unsubscribe, go to http://www.pdml.net and follow the > directions. Don't forget to visit the Pentax Users' Gallery > at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
