First off did you extract the binary from the archive file you
downloaded? (The camera won't know what to do with the Zip file for
example).
If you did that did you put the binary file in the root directory of the
card, (it won't find the file if it's in a subdirectorty).
If you did both those things, then the only things possible are either
software error in your camera;s current firmware or a hardware problems
with your camera's flash memory.
On 10/14/2010 3:21 PM, Eric Weir wrote:
I'm in the process of upgrading the firmware on my *ist DS. I've got the new firmware on the SD
card. Instructions say to turn the camera on while holding the menu button down. At the point the
LCD screen should show "NOW LOADING" and then change to "PROGRAM UPDATE," at
which point the option of proceeding with the upgrade can be selected.
When I do that the screen displays the current version of the firmware -- in my
case 1.0 -- and then goes dark. The shutter and aperture settings on the LCD
panel on top of the camera flash for several seconds and then stops. Nothing
else happens.
Any suggestions?
------------------------------------------------------------------------------------------
Eric Weir
Decatur, GA USA
[email protected]
--
"His lack of education is more than compensated for by his keenly developed moral
bankruptcy."
-Woody Allen
--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
