Ok, I have installed the Opti-Cal 3.7.5 from Spyder I. I have set it to gamma 1.8, screen wb to 5500 and i think the bottom of the set up screen then said luminance 200 and black point 1. Those are the numbers but not sure of the correct terminology,i do not have the system running now.
It then said to set the screen to default brightness and contrast. I don't see a place to set contrast but i set the brightness to full as that's were it was when i got the machine. I set up the unit for Mac and LCD. it ran through its red greens and blues and checked for wb etc. i tried the test print again and its still darker than the screen via LR3. If i set the brightness to 5-6 clicks below the fullest reading, i get fairly close to the print on screen. I looked at the test print on my iBook, which gives me something very very close to the PC, it looks like it should with proper brightness on the pinks and cream colours. Should i just set the brightness to -5 and go from there.?? Dave BTW I hate the caps lock on this key board, i keep hitting it with my typing fingers. >> -- >> PDML Pentax-Discuss Mail List >> [email protected] >> http://pdml.net/mailman/listinfo/pdml_pdml.net >> to UNSUBSCRIBE from the PDML, please visit the link directly above and >> follow the directions. >> > > > > -- > Documenting Life in Rural Ontario. > www.caughtinmotion.com > http://brooksinthecountry.blogspot.com/ > York Region, Ontario, Canada > -- Documenting Life in Rural Ontario. www.caughtinmotion.com http://brooksinthecountry.blogspot.com/ York Region, Ontario, Canada -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
