Hi Judy.I have the SF-1 which is similar,but not exact,so i hope i can help.If you have your A lense off A and on an F stop,push the mode button up and using the arrow buttons near the shutter push until you have an arrow showing on both the shutter AND f marks on the LED.Release the mode button.Then you can adjust shutter and f stop with the arrow keys..If you keep pushing up the mode button,and adjusting the arrow keys,you will just move from bulb, 100 and another shutter speed. As far as the other noise,sorry cannnot help.Good luck.
Dave ---- Begin Original Message ---- From: [EMAIL PROTECTED] Sent: Sat, 02 Mar 2002 21:23:58 +0000 To: [EMAIL PROTECTED] Subject: Hi. �I've just gotten a used SFX in and have two questions. 1. �The manual is no help here but..in shutter priority I can get the full range of speeds from 30 to 2000 but in metered manual I can only get bulb, 100 and 250. �Is this normal for this camera? 2. �when i depress the shutter in single advance mode the camera sounds as if it is taking three or four shots, but the viewfinder only shows the mirror flipping once and the film counter shows only one frame has been taken. �Is this amount of noise normal for this camera? Thanks in advance, Judy - This message is from the Pentax-Discuss Mail List. �To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org . ---- End Original Message ---- Pentax User Stouffville Ontario Canada Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
