Can't disagree with any of the advice so far but will say that I prefer copper wick for desoldering.
On 19 June 2014 00:26, Bill <[email protected]> wrote: > I have a little toy helicopter with camera that came to an unfortunate end > by crashing into a wall at full throttle. As part of the repair, I need to > unsolder the wires to the motors and then solder them back on after mounting > them in the new airframe. > I've never actually done this before. I have a variable temperature > soldering iron with a very fine tip, > > see it here: > http://www.amazon.ca/gp/product/B00C04FADG/ref=shptrk_scth#productDetails > > Any hints, such as how to do it, do I add solder? Do I tin the wire? How > hot, etc. > > thanks > > bill > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
