"Re-importing manufacturing jobs via Ikea" - never thought of that but
very true.
On 7/27/2015 1:50 PM, P.J. Alling wrote:
As with all current consumer electronics, the customer is the quality
assurance department. Just as manufacturing jobs are partially
re-imported to North America every time you buy IKEA, (or similar),
furniture.
Your story reminds me of the MB I replaced recently that had three
memory slots, but wouldn't recognize any memory at all if more than
one was in use.
On 7/27/2015 11:50 AM, Mark C wrote:
Here's why I don't like messing with my PC. Trying to add a USB 3.0
card:
Card #1 - Inateck with Fresco Chipset. Does not work - not detected
by Windows. Returned.
Card #2 - Tenex with NEC chipset. Seems to work fine! Detected by
Windows, driver is installed, Windows notifies me of the devices that
could perform faster... but is physically incompatible with my case
(see the picture)
http://www.markcassino.com/b2evolution/media/blogs/PDML/20150723_100156.jpg
Card #3 - TomTop card with same chipset as the card above but with
the ports oriented in the other direction. Does not work when SATA
power is connected - not detected by Windows. *Is* detected by
Windows when power is NOT connected but devices do not work when
plugged in. Probably needs power! I'm requesting a replacement and if
that does not work... to hell with it!
Grrrrr.....
Mark
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
