You could run a vacuum cleaner as you file. With a suitable tube extension to the locality, of course.
On 28 July 2015 at 16:39, Mark C <[email protected]> wrote: > I have hung onto the working card so far, but I am a little concerned about > the prospect of metal filings in the case. > > > On 7/27/2015 2:05 PM, mike wilson wrote: >> >> Card 2 and some file work (or a Dremel if you are feeling idle) would >> seem to be the answer. >> >> On 27 July 2015 at 16:50, Mark C <[email protected]> wrote: >>> >>> Here's why I don't like messing with my PC. Trying to add a USB 3.0 card: >>> >>> Card #1 - Inateck with Fresco Chipset. Does not work - not detected by >>> Windows. Returned. >>> >>> Card #2 - Tenex with NEC chipset. Seems to work fine! Detected by >>> Windows, >>> driver is installed, Windows notifies me of the devices that could >>> perform >>> faster... but is physically incompatible with my case (see the picture) >>> >>> >>> http://www.markcassino.com/b2evolution/media/blogs/PDML/20150723_100156.jpg >>> >>> Card #3 - TomTop card with same chipset as the card above but with the >>> ports oriented in the other direction. Does not work when SATA power is >>> connected - not detected by Windows. *Is* detected by Windows when power >>> is >>> NOT connected but devices do not work when plugged in. Probably needs >>> power! >>> I'm requesting a replacement and if that does not work... to hell with >>> it! >>> >>> Grrrrr..... >>> >>> Mark >>> >>> >>> >>> --- >>> This email has been checked for viruses by Avast antivirus software. >>> http://www.avast.com >>> >>> >>> -- >>> PDML Pentax-Discuss Mail List >>> [email protected] >>> http://pdml.net/mailman/listinfo/pdml_pdml.net >>> to UNSUBSCRIBE from the PDML, please visit the link directly above and >>> follow the directions. > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
