Frank, Not having tried this, but it should work. The AF360FGZ has both manual and auto modes with a sensor built into the flash. You can put it on auto, dial into the flash the aperture and film speed, set the same on the camera and fire away. You can also use it on full manual.
Bruce Wednesday, May 22, 2002, 5:37:38 PM, you wrote: FW> Hi, FW> would the combination AF360FGZ flash and MX work? FW> On Boz' page I read that the AF360FGZ has a digital command interface and only FW> works with autofocus bodies. However, the MX doesn't send any command except FW> "fire flash to its flash" by shorting the hotshoe. If the AF360 accepts this FW> it should still work. Are the pins at the same locations on the hotshoe? FW> Anyone try this? FW> bye, FW> Frank FW> - FW> This message is from the Pentax-Discuss Mail List. To unsubscribe, FW> go to http://www.pdml.net and follow the directions. Don't forget to FW> visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
