> On 24 May 2018 at 13:35 Godfrey DiGiorgi <[email protected]> wrote: > > > Hepco-Becker makes a center stand that can be fitted easily, any time. It's > not expensive. But I already have a ride-on parking stand and a shop stand > for working on the bike, why should I carry around an additional 10-12 lbs of > center stand that I don't need?
I've never found Guzzi side stands to be particularly reliable. The centre stand would seem to be valuable insurance. > > The clutch action is very smooth and predictable, and pretty darn light; a > shorty lever is all that's needed really. (I never really found the big block > Guzzi clutch to be that onerous, however.) > Certainly not as bad as the throttle action but still no fun in traffic. > G > > > > On May 23, 2018, at 11:02 PM, mike wilson <[email protected]> wrote: > > > > I'd have spent the money on a centre stand. 8-) > > > > Interesting change to the clutch cable routing. I never found the small > > block pull to be as onerous as the bigger bikes' but it must be > > featherlight now. > > > > > >> On 24 May 2018 at 02:34 Godfrey DiGiorgi <[email protected]> wrote: > >> > >> > >> I made portraits of myself and my Moto Guzzi V7III Racer today, since I > >> just got back from having the suspension upgraded, new custom wheels and > >> new tires fitted. > >> > >> https://flic.kr/p/266gsf6 > >> full rez: https://farm1.staticflickr.com/950/41410073995_a696776303_o.jpg > >> > >> https://flic.kr/p/266gseK > >> full rez: https://farm1.staticflickr.com/949/28438935688_a4b4421348_o.jpg > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and follow > the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
