> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Bill Owens > > > I'm printing w/o filters. The spec sheet that comes with > Ilford papers has > two tables for filtration. Should I try the one that uses > 41Y/32M for grade > 2 instead of no filtration?
Since it's a color head it's just going to be very bright with the dials at zero. The lamp has to be bright enough so that when a dial is maxed out you still get a reasonable time. The dual filtration method you mentioned would definitely slow it down...on my old color head I found it slowed things down *too* much. You'll have to experiment. I also found that method wasn't very accurate. If it has a filter drawer you might also experiment with trying the Ilford filters. Their advantage is that they change the exposure by a known amount, whereas fiddling with a single dial on the head will change it by an unknown amount. tv - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
