Hi,
> There can be several reasons that this is not the case. Firstly check for > debris in any of the receptors, check that the gold electrical pins on the > winder the contacts on the base of the body are clean. Also if the assembly has > been over-tightened at some stage the top of the winder could be warped or the > cover on the base of the camera could be distorted preventing the units from > fitting together intimately. Look very carefully at the gaps as you put > together the two pieces. > > Other than that it could possibly be a pair of mechanical mis-alignments that > prevent this particular set of components working together reliably. > Thanks Rob, I should check it! There is one new thing: I took it back from the service and tried again at the weekend. I was surprised, because with the remote release cable it works perfectly now, even single and continueous mode! But the problem is the same with the release button on the body, it still doesn't work. Because I would like to use mostly for macrophotography with the remote release, now the situation is better for me. Anyway, thank you, I should follow your hints! Cheers, Ivan (MuzX) - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
