Trent,
There is nothing wrong with your understanding. You would draw a
similar arc on the soldermask layer, making it a wider line to allow for
Soldermask registration same as pads are generally expanded for soldermask
openings for the same reason.
Sincerely,
Brad Velander
Senior PCB Designer
Northern Airborne Technology
#14 - 1925 Kirschner Road,
Kelowna, BC, V1Y 4N7.
tel (250) 763-2329 ext. 225
fax (250) 762-3374
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, January 20, 2006 9:42 AM
To: Protel EDA Discussion List
Subject: [PEDA] No Solder Mask over an Arc?
In Protel 99SE SP6 is it possible to define an arc or trace so that there is
no solder mask on the trace.
I understand that with pads you can override the Solder Mask (in the
"Advanced" tab in the Properties dialogue) but can you do that with regular
traces, specifically arcs?
To eliminate the solder mask over a trace do I simply draw a line on the
solder mask layer overtop of the trace?
____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:[email protected]
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]
