OK, tried this one, but when I load netlist I see that there is only one copy of analog channel and there should be 20 copies of it. Did I do something wrong with the annotation?
Also, I do not understand how should I load this pre-made PCB (for the analog channel for instance) Regards, JM Peter Krause napisał(a): > Jakub, > > A suggestion. > > What you can do is the following, it worked fro me in 99se > > On the main sheet > > Tools, Annotate, Reset all designators > > Untick current sheet only > > In advanced set the numbers you want allocated for each sheet( thus pcb) > > Then annotate ?parts > > This will annotate all parts uniquely > > Then run design, create netlist, make sure you select, protel, netlabel and > ports global, active project. > > Now this may take a few seconds or more, depending on your pc. > > Load each premade pcb with preselected schematic numbers. > > Load your netlist. > > This should do the trick. > > Best of luck. > > Kind regards > > Peter > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Jakub M. > Sent: Wednesday, 1 November 2006 5:50 AM > To: Protel EDA Discussion List > Subject: [PEDA] Many similar Sheet Symbols > > [PROTEL 99 SE] > > In a device I want to put about 20 similar channels. Therefore I have > made a schema of a channel and have put it to main schema as a Sheet > Symbol 20 times. I have also made PCB for the single channel. > > Question: > > I want to generate netlist for the whole device and to use already made > PCB of channel (the same for all channels). How to do this? > > > Regadrs, > JM > > > > ____________________________________________________________ > You are subscribed to the PEDA discussion forum > > To Post messages: > mailto:[email protected] > > Unsubscribe and Other Options: > http://techservinc.com/mailman/listinfo/peda_techservinc.com > > Browse or Search Old Archives (2001-2004): > http://www.mail-archive.com/[email protected] > > Browse or Search Current Archives (2004-Current): > http://www.mail-archive.com/[email protected] > > > > ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
