Hi Julie –

I used a HOBO Pro V2 Ext Temp/RH logger for my MA research. They are built to 
monitor outdoor conditions and worked well during my study. Our freezer 
conditions are -35C. Not sure if this recommendation will be helpful, since the 
lowest operating temperature for the unit is -40C.

https://www.onsetcomp.com/products/data-loggers/u23-002?creative=178262173812&keyword=&matchtype=&network=g&device=c&gclid=EAIaIQobChMImJ2k5u6t5gIVJYNaBR2W5wyEEAQYAyABEgKfC_D_BwE

William



William Donnelly
(he, him, his)
Assistant Preventive Conservator & Affiliated Instructor WUDPAC
Winterthur Museum, Garden & Library
Direct 302.888.4680
5105 Kennett Pike
Winterthur, DE 19735
winterthur.org



From: [email protected] <[email protected]> On Behalf Of 
[email protected]
Sent: Monday, December 9, 2019 4:51 PM
To: Museumpests <[email protected]>
Subject: [pestlist] Freezer Datalogger: Recommendations?

Hello, Pestlist

Looking for recommendations for a freezer treatment datalogger that can go to 
very low temps.

Backstory:
We set our freezer to stay between -35 and -25F (the variation from its 
cycling). However, there are instances where the temperature has dipped below 
-40F (which is also -40C if anyone else thinks that's interesting!). 
Unfortunately, -40 is the temperature our Onset HOBO bluetooth loggers lose 
functionality. One by one they have been erroring. After it happens once that 
logger can no longer function at temperatures under -20Fish.

Have others ran into this problem? Ideally our freezer wouldn't get that low, 
but this is a problem that seems to happen sporadically despite regular 
maintenance. Can anyone recommend a logger that functions under -40F? I see 
many that have probes, but those will not work with our setup. I've looked into 
Onset and Thermoworks primarily, I'd be happy to investigate other big names if 
suggested.

Regards,

Julie McInnis
Collections Care Specialist
Fine Arts Museums of San Francisco
--
You received this message because you are subscribed to the Google Groups 
"Museumpests" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
[email protected]<mailto:[email protected]>.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/pestlist/ebd60997-acca-4866-88e4-c00ef541a2ca%40googlegroups.com<https://groups.google.com/d/msgid/pestlist/ebd60997-acca-4866-88e4-c00ef541a2ca%40googlegroups.com?utm_medium=email&utm_source=footer>.

This message came from outside of Winterthur, and has been scanned for viruses.

-- 
You received this message because you are subscribed to the Google Groups 
"Museumpests" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/pestlist/6c3002d4938e4e8c94a6e483a0255038%40winterthur.org.

Reply via email to