On Thu, Aug 18, 2016 at 2:14 PM, 최경준 <[email protected]> wrote:
> I called SNESView() at right above call SNESSolve() to check options > that I applied. > Okay, I am not understanding what you want to do. Below, you have setup SNES to calculate the entire Jacobian using a finite-difference (FD) approximation. This is the same as using -snes_fd I thought you wanted to use a matrix-free action for the Jacobian -snes_mf and no preconditioner -pc_type none although I have no idea what kind of a problem this would work for. Matt > SNES Object: 1 MPI processes > type: newtonls > SNES has not been set up so information may be incomplete > maximum iterations=1, maximum function evaluations=10000 > tolerances: relative=1e-08, absolute=1e-32, solution=1e-08 > total number of linear solver iterations=0 > total number of function evaluations=0 > norm schedule ALWAYS > SNESLineSearch Object: 1 MPI processes > type: bt > interpolation: cubic > alpha=1.000000e-04 > maxstep=1.000000e+08, minlambda=1.000000e-12 > tolerances: relative=1.000000e-08, absolute=1.000000e-15, > lambda=1.000000e-08 > maximum iterations=40 > KSP Object: 1 MPI processes > type: gmres > GMRES: restart=30, using Classical (unmodified) Gram-Schmidt > Orthogonalization with no iterative refinement > GMRES: happy breakdown tolerance 1e-30 > maximum iterations=10000 > tolerances: relative=0.001, absolute=1e-50, divergence=10000. > left preconditioning > using nonzero initial guess > using DEFAULT norm type for convergence test > PC Object: 1 MPI processes > type: none > PC has not been set up so information may be incomplete > linear system matrix = precond matrix: > Mat Object: 1 MPI processes > type: mffd > rows=64, cols=64 > Matrix-free approximation: > err=1.49012e-08 (relative error in function evaluation) > The compute h routine has not yet been set > > ------------------------------------------------------------ > ------------------------- > > And this is the whole error message > > [0]PETSC ERROR: --------------------- Error Message > -------------------------------------------------------------- > [0]PETSC ERROR: No support for this operation for this object type > [0]PETSC ERROR: Mat type mffd > [0]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html > for trouble shooting. > [0]PETSC ERROR: Petsc Release Version 3.7.3, Jul, 24, 2016 > [0]PETSC ERROR: ./flus > > > � ��� on a arch-linux2-c-debug > named ckj-System by ckj Fri Aug 19 04:09:56 2016 > [0]PETSC ERROR: Configure options --with-cc=icc --with-cxx=icpc > --with-fc=ifort --with-mpi-include=/opt/intel/impi/ > 5.0.1.035/intel64/include --with-mpi-lib="-L/opt/intel//impi/ > 5.0.1.035/intel64/release -L/opt/intel//impi/5.0.1.035/intel64/lib > -lmpifort -lmpi -lmpigi -ldl -lrt -lpthread" > --with-blas-lapack-dir=/opt/intel/mkl > --prefix=/opt/petsc/3.7.3 > [0]PETSC ERROR: #1 MatZeroEntries() line 5511 in > /home/ckj/Repository/petsc-3.7.3/src/mat/interface/matrix.c > [0]PETSC ERROR: #2 SNESComputeJacobianDefault() line 65 in > /home/ckj/Repository/petsc-3.7.3/src/snes/interface/snesj.c > [0]PETSC ERROR: #3 oursnesjacobian() line 105 in > /home/ckj/Repository/petsc-3.7.3/src/snes/interface/ftn-custom/zsnesf.c > [0]PETSC ERROR: #4 SNESComputeJacobian() line 2312 in > /home/ckj/Repository/petsc-3.7.3/src/snes/interface/snes.c > [0]PETSC ERROR: #5 SNESSolve_NEWTONLS() line 228 in > /home/ckj/Repository/petsc-3.7.3/src/snes/impls/ls/ls.c > [0]PETSC ERROR: #6 SNESSolve() line 4005 in /home/ckj/Repository/petsc-3. > 7.3/src/snes/interface/snes.c > > ------------------------------------------------------------ > --------------------------------- > > I checked that the program got out of calling SNESSolve() after this error > message. > > But I can't figure out the reason for this error. > > > Best, > > Kyungjun > > > 2016-08-19 4:05 GMT+09:00 Matthew Knepley <[email protected]>: > >> On Thu, Aug 18, 2016 at 2:03 PM, 최경준 <[email protected]> wrote: >> >>> I got stuck at FormJacobian stage. >>> >>> - call SNESComputeJacobianDefault(snes, v, J, pJ, FormResidual, ier) >>> --> J & pJ are same with A matrix-free matrix (input argument) >>> >>> >>> >>> with these kind of messages.. >>> >>> [0]PETSC ERROR: No support for this operation for this object type >>> [0]PETSC ERROR: Mat type mffd >>> >> >> 1) Always give the ENTIRE error message >> >> 2) As I said in the last two messages, you can only use this without a >> preconditioner, so you need >> >> -pc_type none >> >> Matt >> >> >>> >>> Guess it's because I used A matrix-free matrix (which is mffd type) into >>> pJ position. >>> >>> Is there any solution for this kind of situation? >>> >>> >>> 2016-08-19 2:05 GMT+09:00 Matthew Knepley <[email protected]>: >>> >>>> On Thu, Aug 18, 2016 at 12:04 PM, 최경준 <[email protected]> >>>> wrote: >>>> >>>>> Then in order not to use preconditioner, >>>>> >>>>> is it ok if I just put A matrix-free matrix (made from >>>>> MatCreateSNESMF()) into the place where preA should be? >>>>> >>>> >>>> Yes, but again the solve will likely perform very poorly. >>>> >>>> Thanks, >>>> >>>> Matt >>>> >>>> >>>>> The flow goes like this >>>>> - call SNESCreate >>>>> - call SNESSetFunction(snes, r, FormResidual, userctx, ier) >>>>> - call MatCreateSNESMF(snes, A, ier) >>>>> - call SNESSetJacobian(snes, A, A, FormJacobian, userctx, ier) >>>>> - call SNESSetFromOptions() >>>>> >>>>> - call SNESGetKSP(snes, ksp, ier) >>>>> - call KSPSetType(ksp, KSPGMRES, ier) >>>>> - call KSPGetPC(ksp, pc, ier) >>>>> - call PCSetType(pc, PCNONE, ier) >>>>> - call KSPGMRESSetRestart(ksp, 30, ier) >>>>> >>>>> - call SNESSolve() >>>>> . >>>>> . >>>>> >>>>> >>>>> and inside the FormJacobian routine >>>>> - call SNESComputeJacobian(snes, v, J, pJ, userctx, ier) --> J and pJ >>>>> must be pointed with A and A. >>>>> >>>>> >>>>> >>>>> Thank you again, >>>>> >>>>> Kyungjun. >>>>> >>>>> 2016-08-19 1:44 GMT+09:00 Matthew Knepley <[email protected]>: >>>>> >>>>>> On Thu, Aug 18, 2016 at 11:42 AM, 최경준 <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Thanks for your helpful answers. >>>>>>> >>>>>>> Here's another question... >>>>>>> >>>>>>> As I read some example PETSc codes, I noticed that there should be a >>>>>>> preconditioning matrix (e.g. approx. jacobian matrix) when using >>>>>>> MatCreateSNESMF(). >>>>>>> >>>>>>> I mean, >>>>>>> after calling MatCreateSNESMF(snes, A, ier), >>>>>>> there should be another matrix preA(preconditioning matrix) to use >>>>>>> SNESSetJacobian(snes, A, preA, FormJacobian, ctx, ier). >>>>>>> >>>>>>> >>>>>>> 1) Is there any way that I can use matrix-free method without making >>>>>>> preconditioning matrix? >>>>>>> >>>>>> >>>>>> Don't use a preconditioner. As you might expect, this does not often >>>>>> work out well. >>>>>> >>>>>> >>>>>>> 2) I have a reference code, and the code adopts >>>>>>> >>>>>>> MatFDColoringCreate() >>>>>>> and finally uses >>>>>>> SNESComputeJacobianDefaultColor() at FormJacobian stage. >>>>>>> >>>>>>> But I can't see the inside of the fdcolor and I'm curious of this >>>>>>> mechanism. Can you explain this very briefly or tell me an example code >>>>>>> that I can refer to. ( I think none of PETSc example code is using >>>>>>> fdcolor..) >>>>>>> >>>>>> >>>>>> This is the default, so there is no need for all that code. We use >>>>>> naive graph 2-coloring. I think there might be a review article by Alex >>>>>> Pothen about that. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Matt >>>>>> >>>>>> >>>>>>> >>>>>>> Best, >>>>>>> >>>>>>> Kyungjun. >>>>>>> >>>>>>> 2016-08-19 0:54 GMT+09:00 Matthew Knepley <[email protected]>: >>>>>>> >>>>>>>> On Thu, Aug 18, 2016 at 10:39 AM, 최경준 <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> 1) I wanna know the difference between applying option with >>>>>>>>> command line and within source code. >>>>>>>>> From my experience, command line option helps set other default >>>>>>>>> settings that I didn't applied, I guess. >>>>>>>>> >>>>>>>> >>>>>>>> The command line arguments are applied to an object when >>>>>>>> *SetFromOptions() is called, so in this case >>>>>>>> you want SNESSetFromOptions() on the solver. There should be no >>>>>>>> difference from using the API. >>>>>>>> >>>>>>>> >>>>>>>>> 2) I made a matrix-free matrix with MatCreateSNESMF function, and >>>>>>>>> every time I check my snes context with SNESView, >>>>>>>>> >>>>>>>>> Mat Object: 1 MPI processes >>>>>>>>> type: mffd >>>>>>>>> rows=11616, cols=11616 >>>>>>>>> Matrix-free approximation: >>>>>>>>> err=1.49012e-08 (relative error in function evaluation) >>>>>>>>> The compute h routine has not yet been set >>>>>>>>> >>>>>>>>> at the end of line shows there's no routine for computing h value. >>>>>>>>> I used MatMFFDWPSetComputeNormU function, but it didn't work I >>>>>>>>> think. >>>>>>>>> Is it ok if I leave the h value that way? Or should I have to set >>>>>>>>> h computing routine? >>>>>>>>> >>>>>>>> >>>>>>>> I am guessing you are calling the function on a different object >>>>>>>> from the one that is viewed here. >>>>>>>> However, there will always be a default function for computing h. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Matt >>>>>>>> >>>>>>>> >>>>>>>>> Kyungjun. >>>>>>>>> >>>>>>>>> 2016-08-18 23:18 GMT+09:00 Matthew Knepley <[email protected]>: >>>>>>>>> >>>>>>>>>> On Thu, Aug 18, 2016 at 8:35 AM, 최경준 <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Hi, I'm trying to set my SNES matrix-free with Walker & Pernice >>>>>>>>>>> way of computing h value. >>>>>>>>>>> >>>>>>>>>>> I found above command (MatSNESMFWPSetComputeNormU) but my >>>>>>>>>>> fortran compiler couldn't fine any reference of that command. >>>>>>>>>>> >>>>>>>>>>> I checked Petsc changes log, but there weren't any mentions >>>>>>>>>>> about that command. >>>>>>>>>>> >>>>>>>>>>> Should I have to include another specific header file? >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> We have this function >>>>>>>>>> >>>>>>>>>> http://www.mcs.anl.gov/petsc/petsc-current/docs/manualpage >>>>>>>>>> s/Mat/MatMFFDWPSetComputeNormU.html >>>>>>>>>> >>>>>>>>>> but I would recommend using the command line option >>>>>>>>>> >>>>>>>>>> *-mat_mffd_compute_normu* >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> >>>>>>>>>> Matt >>>>>>>>>> >>>>>>>>>> Thank you always. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> What most experimenters take for granted before they begin their >>>>>>>>>> experiments is infinitely more interesting than any results to which >>>>>>>>>> their >>>>>>>>>> experiments lead. >>>>>>>>>> -- Norbert Wiener >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> What most experimenters take for granted before they begin their >>>>>>>> experiments is infinitely more interesting than any results to which >>>>>>>> their >>>>>>>> experiments lead. >>>>>>>> -- Norbert Wiener >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> What most experimenters take for granted before they begin their >>>>>> experiments is infinitely more interesting than any results to which >>>>>> their >>>>>> experiments lead. >>>>>> -- Norbert Wiener >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> What most experimenters take for granted before they begin their >>>> experiments is infinitely more interesting than any results to which their >>>> experiments lead. >>>> -- Norbert Wiener >>>> >>> >>> >> >> >> -- >> What most experimenters take for granted before they begin their >> experiments is infinitely more interesting than any results to which their >> experiments lead. >> -- Norbert Wiener >> > > -- What most experimenters take for granted before they begin their experiments is infinitely more interesting than any results to which their experiments lead. -- Norbert Wiener
