Dear Matt. I didn't use the command line options because it looked not working.
I called SNESSetFromOptions(snes, ier) in my source code, but options like -snes_mf or -snes_monitor doesn't look working. Is there anything that I should consider more? 2016-08-19 4:47 GMT+09:00 Matthew Knepley <[email protected]>: > On Thu, Aug 18, 2016 at 2:44 PM, 최경준 <[email protected]> wrote: > >> Is there a part that you considered this as finite-difference >> approximation? >> I thought I used matrix-free method with MatCreateSNESMF() function >> > > You did not tell the SNES to use a MF Jacobian, you just made a Mat > object. This is why > we encourage people to use the command line. Everything is setup > correctly and in order. > Why would you choose not to. This creates long rounds of email. > > Matt > > >> Also I used >> - call PCSetType(pc, PCNONE, ier) --> so the pc type shows 'none' at the >> log >> >> >> I didn't use any of command line options. >> >> >> Kyungjun >> >> 2016-08-19 4:27 GMT+09:00 Barry Smith <[email protected]>: >> >>> >>> You can't use that Jacobian function SNESComputeJacobianDefault with >>> matrix free, it tries to compute the matrix entries and stick them into the >>> matrix. You can use MatMFFDComputeJacobian >>> >>> > On Aug 18, 2016, at 2:03 PM, 최경준 <[email protected]> wrote: >>> > >>> > I got stuck at FormJacobian stage. >>> > >>> > - call SNESComputeJacobianDefault(snes, v, J, pJ, FormResidual, ier) >>> --> J & pJ are same with A matrix-free matrix (input argument) >>> > >>> > >>> > >>> > with these kind of messages.. >>> > >>> > [0]PETSC ERROR: No support for this operation for this object type >>> > [0]PETSC ERROR: Mat type mffd >>> > >>> > >>> > >>> > Guess it's because I used A matrix-free matrix (which is mffd type) >>> into pJ position. >>> > >>> > Is there any solution for this kind of situation? >>> > >>> > >>> > 2016-08-19 2:05 GMT+09:00 Matthew Knepley <[email protected]>: >>> > On Thu, Aug 18, 2016 at 12:04 PM, 최경준 <[email protected]> >>> wrote: >>> > Then in order not to use preconditioner, >>> > >>> > is it ok if I just put A matrix-free matrix (made from >>> MatCreateSNESMF()) into the place where preA should be? >>> > >>> > Yes, but again the solve will likely perform very poorly. >>> > >>> > Thanks, >>> > >>> > Matt >>> > >>> > The flow goes like this >>> > - call SNESCreate >>> > - call SNESSetFunction(snes, r, FormResidual, userctx, ier) >>> > - call MatCreateSNESMF(snes, A, ier) >>> > - call SNESSetJacobian(snes, A, A, FormJacobian, userctx, ier) >>> > - call SNESSetFromOptions() >>> > >>> > - call SNESGetKSP(snes, ksp, ier) >>> > - call KSPSetType(ksp, KSPGMRES, ier) >>> > - call KSPGetPC(ksp, pc, ier) >>> > - call PCSetType(pc, PCNONE, ier) >>> > - call KSPGMRESSetRestart(ksp, 30, ier) >>> > >>> > - call SNESSolve() >>> > . >>> > . >>> > >>> > >>> > and inside the FormJacobian routine >>> > - call SNESComputeJacobian(snes, v, J, pJ, userctx, ier) --> J and pJ >>> must be pointed with A and A. >>> > >>> > >>> > >>> > Thank you again, >>> > >>> > Kyungjun. >>> > >>> > 2016-08-19 1:44 GMT+09:00 Matthew Knepley <[email protected]>: >>> > On Thu, Aug 18, 2016 at 11:42 AM, 최경준 <[email protected]> >>> wrote: >>> > Thanks for your helpful answers. >>> > >>> > Here's another question... >>> > >>> > As I read some example PETSc codes, I noticed that there should be a >>> preconditioning matrix (e.g. approx. jacobian matrix) when using >>> MatCreateSNESMF(). >>> > >>> > I mean, >>> > after calling MatCreateSNESMF(snes, A, ier), >>> > there should be another matrix preA(preconditioning matrix) to use >>> SNESSetJacobian(snes, A, preA, FormJacobian, ctx, ier). >>> > >>> > >>> > 1) Is there any way that I can use matrix-free method without making >>> preconditioning matrix? >>> > >>> > Don't use a preconditioner. As you might expect, this does not often >>> work out well. >>> > >>> > 2) I have a reference code, and the code adopts >>> > >>> > MatFDColoringCreate() >>> > and finally uses >>> > SNESComputeJacobianDefaultColor() at FormJacobian stage. >>> > >>> > But I can't see the inside of the fdcolor and I'm curious of this >>> mechanism. Can you explain this very briefly or tell me an example code >>> that I can refer to. ( I think none of PETSc example code is using >>> fdcolor..) >>> > >>> > This is the default, so there is no need for all that code. We use >>> naive graph 2-coloring. I think there might be a review article by Alex >>> Pothen about that. >>> > >>> > Thanks, >>> > >>> > Matt >>> > >>> > >>> > Best, >>> > >>> > Kyungjun. >>> > >>> > 2016-08-19 0:54 GMT+09:00 Matthew Knepley <[email protected]>: >>> > On Thu, Aug 18, 2016 at 10:39 AM, 최경준 <[email protected]> >>> wrote: >>> > 1) I wanna know the difference between applying option with command >>> line and within source code. >>> > From my experience, command line option helps set other default >>> settings that I didn't applied, I guess. >>> > >>> > The command line arguments are applied to an object when >>> *SetFromOptions() is called, so in this case >>> > you want SNESSetFromOptions() on the solver. There should be no >>> difference from using the API. >>> > >>> > 2) I made a matrix-free matrix with MatCreateSNESMF function, and >>> every time I check my snes context with SNESView, >>> > >>> > Mat Object: 1 MPI processes >>> > type: mffd >>> > rows=11616, cols=11616 >>> > Matrix-free approximation: >>> > err=1.49012e-08 (relative error in function evaluation) >>> > The compute h routine has not yet been set >>> > >>> > at the end of line shows there's no routine for computing h value. >>> > I used MatMFFDWPSetComputeNormU function, but it didn't work I think. >>> > Is it ok if I leave the h value that way? Or should I have to set h >>> computing routine? >>> > >>> > I am guessing you are calling the function on a different object from >>> the one that is viewed here. >>> > However, there will always be a default function for computing h. >>> > >>> > Thanks, >>> > >>> > Matt >>> > >>> > Kyungjun. >>> > >>> > 2016-08-18 23:18 GMT+09:00 Matthew Knepley <[email protected]>: >>> > On Thu, Aug 18, 2016 at 8:35 AM, 최경준 <[email protected]> >>> wrote: >>> > Hi, I'm trying to set my SNES matrix-free with Walker & Pernice way of >>> computing h value. >>> > >>> > I found above command (MatSNESMFWPSetComputeNormU) but my fortran >>> compiler couldn't fine any reference of that command. >>> > >>> > I checked Petsc changes log, but there weren't any mentions about that >>> command. >>> > >>> > Should I have to include another specific header file? >>> > >>> > We have this function >>> > >>> > http://www.mcs.anl.gov/petsc/petsc-current/docs/manualpages >>> /Mat/MatMFFDWPSetComputeNormU.html >>> > >>> > but I would recommend using the command line option >>> > >>> > -mat_mffd_compute_normu >>> > >>> > Thanks, >>> > >>> > Matt >>> > >>> > Thank you always. >>> > >>> > >>> > >>> > -- >>> > What most experimenters take for granted before they begin their >>> experiments is infinitely more interesting than any results to which their >>> experiments lead. >>> > -- Norbert Wiener >>> > >>> > >>> > >>> > >>> > -- >>> > What most experimenters take for granted before they begin their >>> experiments is infinitely more interesting than any results to which their >>> experiments lead. >>> > -- Norbert Wiener >>> > >>> > >>> > >>> > >>> > -- >>> > What most experimenters take for granted before they begin their >>> experiments is infinitely more interesting than any results to which their >>> experiments lead. >>> > -- Norbert Wiener >>> > >>> > >>> > >>> > >>> > -- >>> > What most experimenters take for granted before they begin their >>> experiments is infinitely more interesting than any results to which their >>> experiments lead. >>> > -- Norbert Wiener >>> > >>> >>> >> > > > -- > What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > -- Norbert Wiener >
