Yea I added some now it works, this got it all working now, attaching 2 pf.conf's and the diagram is below, lemme know If I still got something amiss, I think I got it all.
Eth0(---Internet)
|
Machine1---Eth1(10.0.0.1,10.0.0.0/24)-----|
| |
Eth2(10.0.1.1,10.0.1.0/24) |
|
|
|
Eth0(---Internet) |
| |
Machine2---Eth1(10.0.0.2,10.0.0.0/24)-----|
|
Eth2(10.0.4.1,10.0.4.0/24)
Amir Seyavash Mesry
[EMAIL PROTECTED]
LSI Logic Corporation
http://www.lsilogic.com/
Raid Support Test Technician
6145-D Northbelt Parkway
Norcross, GA 30071
678-728-1211
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the
copy you received. Thank you.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of j
knight
Sent: Monday, June 02, 2003 5:50 PM
To: pf
Subject: Re: Ruleset Problem
Amir Seyavash Mesry wrote:
> OMG TYPO! Packet is going from 10.0.0.51 to 10.0.0.1 to 10.0.0.2 to
> 10.0.4.1 Maybe this clarifys it now, lol.
I'm sorry, it really doesn't.
> Machine1
> Eth0=77.77.77.77
> Eth1=10.0.0.1 network 10.0.0.0/24
> Eth2=10.0.0.2 network 10.0.0.0/24
>
> Machine2
> Eth0=11.11.11.11
> Eth1=10.0.0.2 network 10.0.0.0/24
> Eth2=10.0.4.1 network 10.0.4.0/24
I don't understand how these machines are connected or which machine is
loaded with the pf.conf you gave. You say above the packets are going
from 10.0.0.2 to 10.0.4.1 but I don't see how that's possible with a /24
netmask without some intermediate hop.
Did you test it with the "pass out" rules?
.joel
pf1.conf
Description: Binary data
pf2.conf
Description: Binary data
