On Thu, Dec 3, 2015 at 6:59 AM, Alvaro Herrera <alvhe...@2ndquadrant.com> wrote:
> I didn't push the changes for config_default you requested a few
> messages upthread; it's not clear to me how setting it to undef affects
> the whole thing. If setting it to undef makes the MSVC toolchain run
> the tap tests in the default config, then I can do it; let's be clear
> about what branch to backpatch this to. Also the "1;" at the end of
> RewindTest.
Setting it to undef will prevent the tests to run, per vcregress.pl:
sub tap_check
{
die "Tap tests not enabled in configuration"
unless $config->{tap_tests};
Also, setting it to undef will match the existing behavior on
platforms where ./configure is used because the switch
--enable-tap-tests needs to be used there. And I would believe that in
most cases Windows environments are not going to have IPC::Run
deployed.
I have also rebased the recovery test suite as the attached, using the
infrastructure that has been committed lately.
Regards,
--
Michael
From de2121eeb50c5ae49b29a2ac21a16579eae2de98 Mon Sep 17 00:00:00 2001
From: Michael Paquier <mich...@otacoo.com>
Date: Thu, 3 Dec 2015 13:48:48 +0900
Subject: [PATCH 1/2] Fix tap_test configuration in MSVC builds
---
src/tools/msvc/config_default.pl | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/src/tools/msvc/config_default.pl b/src/tools/msvc/config_default.pl
index b9f2ff4..e50be7e 100644
--- a/src/tools/msvc/config_default.pl
+++ b/src/tools/msvc/config_default.pl
@@ -3,7 +3,7 @@ use strict;
use warnings;
our $config = {
- asserts => 0, # --enable-cassert
+ asserts => 0, # --enable-cassert
# integer_datetimes=>1, # --enable-integer-datetimes - on is now default
# float4byval=>1, # --disable-float4-byval, on by default
@@ -13,18 +13,19 @@ our $config = {
# blocksize => 8, # --with-blocksize, 8kB by default
# wal_blocksize => 8, # --with-wal-blocksize, 8kB by default
# wal_segsize => 16, # --with-wal-segsize, 16MB by default
- ldap => 1, # --with-ldap
- extraver => undef, # --with-extra-version=<string>
- nls => undef, # --enable-nls=<path>
- tcl => undef, # --with-tls=<path>
- perl => undef, # --with-perl
- python => undef, # --with-python=<path>
- openssl => undef, # --with-openssl=<path>
- uuid => undef, # --with-ossp-uuid
- xml => undef, # --with-libxml=<path>
- xslt => undef, # --with-libxslt=<path>
- iconv => undef, # (not in configure, path to iconv)
- zlib => undef # --with-zlib=<path>
+ ldap => 1, # --with-ldap
+ extraver => undef, # --with-extra-version=<string>
+ nls => undef, # --enable-nls=<path>
+ tap_tests => undef, # --enable-tap-tests
+ tcl => undef, # --with-tls=<path>
+ perl => undef, # --with-perl
+ python => undef, # --with-python=<path>
+ openssl => undef, # --with-openssl=<path>
+ uuid => undef, # --with-ossp-uuid
+ xml => undef, # --with-libxml=<path>
+ xslt => undef, # --with-libxslt=<path>
+ iconv => undef, # (not in configure, path to iconv)
+ zlib => undef # --with-zlib=<path>
};
1;
--
2.6.3
From 4ee2a99db2a414f85e961110279f4b97309cd927 Mon Sep 17 00:00:00 2001
From: Michael Paquier <mich...@otacoo.com>
Date: Thu, 3 Dec 2015 15:41:12 +0900
Subject: [PATCH 2/2] Add recovery test suite
This includes basic tests maipulating standbys, be they archiving or
streaming nodes, and some basic sanity checks around them.
---
src/test/Makefile | 2 +-
src/test/perl/RecoveryTest.pm | 167 ++++++++++++++++++++++++++++
src/test/recovery/.gitignore | 3 +
src/test/recovery/Makefile | 17 +++
src/test/recovery/README | 19 ++++
src/test/recovery/t/001_stream_rep.pl | 58 ++++++++++
src/test/recovery/t/002_archiving.pl | 43 +++++++
src/test/recovery/t/003_recovery_targets.pl | 123 ++++++++++++++++++++
src/test/recovery/t/004_timeline_switch.pl | 66 +++++++++++
src/test/recovery/t/005_replay_delay.pl | 41 +++++++
10 files changed, 538 insertions(+), 1 deletion(-)
create mode 100644 src/test/perl/RecoveryTest.pm
create mode 100644 src/test/recovery/.gitignore
create mode 100644 src/test/recovery/Makefile
create mode 100644 src/test/recovery/README
create mode 100644 src/test/recovery/t/001_stream_rep.pl
create mode 100644 src/test/recovery/t/002_archiving.pl
create mode 100644 src/test/recovery/t/003_recovery_targets.pl
create mode 100644 src/test/recovery/t/004_timeline_switch.pl
create mode 100644 src/test/recovery/t/005_replay_delay.pl
diff --git a/src/test/Makefile b/src/test/Makefile
index b713c2c..7f7754f 100644
--- a/src/test/Makefile
+++ b/src/test/Makefile
@@ -12,7 +12,7 @@ subdir = src/test
top_builddir = ../..
include $(top_builddir)/src/Makefile.global
-SUBDIRS = regress isolation modules
+SUBDIRS = regress isolation modules recovery
# We don't build or execute examples/, locale/, or thread/ by default,
# but we do want "make clean" etc to recurse into them. Likewise for ssl/,
diff --git a/src/test/perl/RecoveryTest.pm b/src/test/perl/RecoveryTest.pm
new file mode 100644
index 0000000..a947a2d
--- /dev/null
+++ b/src/test/perl/RecoveryTest.pm
@@ -0,0 +1,167 @@
+# RecoveryTest, Set of common routines for recovery tests
+#
+# This works as a layer on top of PostgresNode to manage nodes as archiving
+# or streaming standbys and master nodes.
+
+package RecoveryTest;
+
+use strict;
+use warnings;
+
+use Cwd;
+use Exporter 'import';
+use IPC::Run qw(run start);
+use PostgresNode;
+use RecursiveCopy;
+use TestLib;
+use Test::More;
+
+our @EXPORT = qw(
+ enable_archiving
+ enable_restoring
+ enable_streaming
+ make_master
+ make_archive_standby
+ make_stream_standby
+);
+
+# Set of handy routines able to set up a node with different characteristics
+# Enable streaming replication
+sub enable_streaming
+{
+ my $node_root = shift; # Instance to link to
+ my $node_standby = shift;
+ my $root_connstr = $node_root->connstr;
+ my $applname = $node_standby->applname;
+
+ $node_standby->append_conf('recovery.conf', qq(
+primary_conninfo='$root_connstr application_name=$applname'
+standby_mode=on
+recovery_target_timeline='latest'
+));
+}
+
+# Enable the use of restore_command from a node
+sub enable_restoring
+{
+ my $node_root = shift; # Instance to link to
+ my $node_standby = shift;
+ my $path = $node_root->archive_dir;
+
+ # Switch path to use slashes on Windows
+ $path =~ tr#\\#/# if ($windows_os);
+ my $copy_command = $windows_os ?
+ "copy \"$path\\\\%f\" \"%p\"" :
+ "cp -i $path/%f %p";
+ $node_standby->append_conf('recovery.conf', qq(
+restore_command='$copy_command'
+standby_mode=on
+));
+}
+
+# Enable WAL archiving on a node
+sub enable_archiving
+{
+ my $node = shift;
+ my $path = $node->archive_dir;
+
+ # Switch path to use slashes on Windows
+ $path =~ tr#\\#/# if ($windows_os);
+ my $copy_command = $windows_os ?
+ "copy \"%p\" \"$path\\\\%f\"" :
+ "cp %p $path/%f";
+
+ # Enable archive_mode and archive_command on node
+ $node->append_conf('postgresql.conf', qq(
+archive_mode = on
+archive_command = '$copy_command'
+));
+}
+
+# Master node initialization.
+sub make_master
+{
+ my $node_master = get_new_node();
+ my $port_master = $node_master->port;
+ print "# Initializing master node wih port $port_master\n";
+ $node_master->init;
+ configure_base_node($node_master);
+ return $node_master;
+}
+
+sub configure_base_node
+{
+ my $node = shift;
+
+ $node->append_conf('postgresql.conf', qq(
+wal_level = hot_standby
+max_wal_senders = 5
+wal_keep_segments = 20
+max_wal_size = 128MB
+shared_buffers = 1MB
+wal_log_hints = on
+hot_standby = on
+autovacuum = off
+));
+}
+
+# Standby node initializations
+# Node only streaming.
+sub make_stream_standby
+{
+ my $node_master = shift;
+ my $backup_name = shift;
+ my $node_standby = get_new_node();
+ my $master_port = $node_master->port;
+ my $standby_port = $node_standby->port;
+
+ print "# Initializing streaming mode for node $standby_port from node $master_port\n";
+ $node_standby->init_from_backup($node_master, $backup_name);
+ configure_base_node($node_standby);
+
+ # Start second node, streaming from first one
+ enable_streaming($node_master, $node_standby);
+ return $node_standby;
+}
+
+# Node getting WAL only from archives
+sub make_archive_standby
+{
+ my $node_master = shift;
+ my $backup_name = shift;
+ my $node_standby = get_new_node();
+ my $master_port = $node_master->port;
+ my $standby_port = $node_standby->port;
+
+ print "# Initializing archive mode for node $standby_port from node $master_port\n";
+ $node_standby->init_from_backup($node_master, $backup_name);
+ configure_base_node($node_standby);
+
+ # Start second node, restoring from first one
+ enable_restoring($node_master, $node_standby);
+ return $node_standby;
+}
+
+# Wait until a node is able to accept queries. Useful when putting a node
+# in recovery and wait for it to be able to work particularly on slow
+# machines.
+sub wait_for_node
+{
+ my $node = shift;
+ my $max_attempts = 30;
+ my $attempts = 0;
+ while ($attempts < $max_attempts)
+ {
+ if (run_log(['pg_isready', '-p', $node->port]))
+ {
+ return 1;
+ }
+
+ # Wait a second before retrying.
+ sleep 1;
+ $attempts++;
+ }
+ return 0;
+}
+
+1;
diff --git a/src/test/recovery/.gitignore b/src/test/recovery/.gitignore
new file mode 100644
index 0000000..499fa7d
--- /dev/null
+++ b/src/test/recovery/.gitignore
@@ -0,0 +1,3 @@
+# Generated by test suite
+/regress_log/
+/tmp_check/
diff --git a/src/test/recovery/Makefile b/src/test/recovery/Makefile
new file mode 100644
index 0000000..16c063a
--- /dev/null
+++ b/src/test/recovery/Makefile
@@ -0,0 +1,17 @@
+#-------------------------------------------------------------------------
+#
+# Makefile for src/test/recovery
+#
+# Portions Copyright (c) 1996-2015, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/test/recovery/Makefile
+#
+#-------------------------------------------------------------------------
+
+subdir = src/test/recovery
+top_builddir = ../../..
+include $(top_builddir)/src/Makefile.global
+
+check:
+ $(prove_check)
diff --git a/src/test/recovery/README b/src/test/recovery/README
new file mode 100644
index 0000000..20b98e0
--- /dev/null
+++ b/src/test/recovery/README
@@ -0,0 +1,19 @@
+src/test/recovery/README
+
+Regression tests for recovery and replication
+=============================================
+
+This directory contains a test suite for recovery and replication,
+testing mainly the interactions of recovery.conf with cluster
+instances by providing a simple set of routines that can be used
+to define a custom cluster for a test, including backup, archiving,
+and streaming configuration.
+
+Running the tests
+=================
+
+ make check
+
+NOTE: This creates a temporary installation, and some tests may
+create one or multiple nodes, be they master or standby(s) for the
+purpose of the tests.
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
new file mode 100644
index 0000000..255559b
--- /dev/null
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -0,0 +1,58 @@
+# Minimal test testing streaming replication
+use strict;
+use warnings;
+use TestLib;
+use Test::More tests => 4;
+use RecoveryTest;
+
+# Initialize master node
+my $node_master = make_master();
+$node_master->start;
+my $backup_name = 'my_backup';
+
+# Take backup
+$node_master->backup($backup_name);
+
+# Create streaming standby linking to master
+my $node_standby_1 = make_stream_standby($node_master, $backup_name);
+$node_standby_1->start;
+
+# Take backup of standby 1 (not mandatory, but useful to check if
+# pg_basebackup works on a standby).
+$node_standby_1->backup($backup_name);
+
+# Create second standby node linking to standby 1
+my $node_standby_2 = make_stream_standby($node_standby_1, $backup_name);
+$node_standby_2->start;
+$node_standby_2->backup($backup_name);
+
+# Create some content on master and check its presence in standby 1
+$node_master->psql('postgres', "CREATE TABLE tab_int AS SELECT generate_series(1,1002) AS a");
+
+# Wait for standbys to catch up
+my $applname_1 = $node_standby_1->applname;
+my $applname_2 = $node_standby_2->applname;
+my $caughtup_query = "SELECT pg_current_xlog_location() = write_location FROM pg_stat_replication WHERE application_name = '$applname_1';";
+$node_master->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby 1 to catch up";
+$caughtup_query = "SELECT pg_last_xlog_replay_location() = write_location FROM pg_stat_replication WHERE application_name = '$applname_2';";
+$node_standby_1->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby 2 to catch up";
+
+my $result = $node_standby_1->psql('postgres', "SELECT count(*) FROM tab_int");
+print "standby 1: $result\n";
+is($result, qq(1002), 'check streamed content on standby 1');
+
+$result = $node_standby_2->psql('postgres', "SELECT count(*) FROM tab_int");
+print "standby 2: $result\n";
+is($result, qq(1002), 'check streamed content on standby 2');
+
+# Check that only READ-only queries can run on standbys
+$node_standby_1->command_fails(['psql', '-A', '-t', '--no-psqlrc',
+ '-d', $node_standby_1->connstr, '-c',
+ "INSERT INTO tab_int VALUES (1)"],
+ 'Read-only queries on standby 1');
+$node_standby_2->command_fails(['psql', '-A', '-t', '--no-psqlrc',
+ '-d', $node_standby_2->connstr, '-c',
+ "INSERT INTO tab_int VALUES (1)"],
+ 'Read-only queries on standby 2');
diff --git a/src/test/recovery/t/002_archiving.pl b/src/test/recovery/t/002_archiving.pl
new file mode 100644
index 0000000..09f3c71
--- /dev/null
+++ b/src/test/recovery/t/002_archiving.pl
@@ -0,0 +1,43 @@
+# test for archiving with warm standby
+use strict;
+use warnings;
+use TestLib;
+use Test::More tests => 1;
+use File::Copy;
+use RecoveryTest;
+
+# Initialize master node, doing archives
+my $node_master = make_master();
+my $backup_name = 'my_backup';
+enable_archiving($node_master);
+
+# Start it
+$node_master->start;
+
+# Take backup for slave
+$node_master->backup($backup_name);
+
+# Initialize standby node from backup, fetching WAL from archives
+my $node_standby = make_archive_standby($node_master, $backup_name);
+$node_standby->append_conf('postgresql.conf', qq(
+wal_retrieve_retry_interval = '100ms'
+));
+$node_standby->start;
+
+# Create some content on master
+$node_master->psql('postgres', "CREATE TABLE tab_int AS SELECT generate_series(1,1000) AS a");
+my $current_lsn = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+
+# Force archiving of WAL file to make it present on master
+$node_master->psql('postgres', "SELECT pg_switch_xlog()");
+
+# Add some more content, it should not be present on standby
+$node_master->psql('postgres', "INSERT INTO tab_int VALUES (generate_series(1001,2000))");
+
+# Wait until necessary replay has been done on standby
+my $caughtup_query = "SELECT '$current_lsn'::pg_lsn <= pg_last_xlog_replay_location()";
+$node_standby->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby to catch up";
+
+my $result = $node_standby->psql('postgres', "SELECT count(*) FROM tab_int");
+is($result, qq(1000), 'check content from archives');
diff --git a/src/test/recovery/t/003_recovery_targets.pl b/src/test/recovery/t/003_recovery_targets.pl
new file mode 100644
index 0000000..428bf82
--- /dev/null
+++ b/src/test/recovery/t/003_recovery_targets.pl
@@ -0,0 +1,123 @@
+# Test for recovery targets: name, timestamp, XID
+use strict;
+use warnings;
+use TestLib;
+use Test::More tests => 7;
+
+use RecoveryTest;
+
+# Create and test a standby from given backup, with a certain
+# recovery target.
+sub test_recovery_standby
+{
+ my $test_name = shift;
+ my $node_master = shift;
+ my $recovery_params = shift;
+ my $num_rows = shift;
+ my $until_lsn = shift;
+
+ my $node_standby = make_archive_standby($node_master, 'my_backup');
+
+ foreach my $param_item (@$recovery_params)
+ {
+ $node_standby->append_conf('recovery.conf',
+ qq($param_item
+));
+ }
+
+ $node_standby->start;
+
+ # Wait until standby has replayed enough data
+ my $caughtup_query = "SELECT '$until_lsn'::pg_lsn <= pg_last_xlog_replay_location()";
+ $node_standby->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby to catch up";
+
+ # Create some content on master and check its presence in standby
+ my $result = $node_standby->psql('postgres', "SELECT count(*) FROM tab_int");
+ is($result, qq($num_rows), "check standby content for $test_name");
+
+ # Stop standby node
+ $node_standby->teardown_node;
+}
+
+# Initialize master node
+my $node_master = make_master();
+enable_archiving($node_master);
+
+# Start it
+$node_master->start;
+
+# Create data before taking the backup, aimed at testing
+# recovery_target = 'immediate'
+$node_master->psql('postgres', "CREATE TABLE tab_int AS SELECT generate_series(1,1000) AS a");
+my $lsn1 = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+
+# Take backup from which all operations will be run
+$node_master->backup('my_backup');
+
+# Insert some data with used as a replay reference, with a recovery
+# target TXID.
+$node_master->psql('postgres', "INSERT INTO tab_int VALUES (generate_series(1001,2000))");
+my $recovery_txid = $node_master->psql('postgres', "SELECT txid_current()");
+my $lsn2 = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+
+# More data, with recovery target timestamp
+$node_master->psql('postgres', "INSERT INTO tab_int VALUES (generate_series(2001,3000))");
+my $recovery_time = $node_master->psql('postgres', "SELECT now()");
+my $lsn3 = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+
+# Even more data, this time with a recovery target name
+$node_master->psql('postgres',
+ "INSERT INTO tab_int VALUES (generate_series(3001,4000))");
+my $recovery_name = "my_target";
+my $lsn4 = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+$node_master->psql('postgres', "SELECT pg_create_restore_point('$recovery_name'");
+
+# Force archiving of WAL file
+$node_master->psql('postgres', "SELECT pg_switch_xlog()");
+
+# Test recovery targets
+my @recovery_params = ( "recovery_target = 'immediate'" );
+test_recovery_standby('immediate target', $node_master,
+ \@recovery_params,
+ "1000", $lsn1);
+@recovery_params = ( "recovery_target_xid = '$recovery_txid'" );
+test_recovery_standby('XID', $node_master,
+ \@recovery_params,
+ "2000", $lsn2);
+@recovery_params = ( "recovery_target_time = '$recovery_time'" );
+test_recovery_standby('Time', $node_master,
+ \@recovery_params,
+ "3000", $lsn3);
+@recovery_params = ( "recovery_target_name = '$recovery_name'" );
+test_recovery_standby('Name', $node_master,
+ \@recovery_params,
+ "4000", $lsn4);
+
+# Multiple targets
+# Last entry has priority (note that an array respects the order of items
+# not hashes).
+@recovery_params = (
+ "recovery_target_name = '$recovery_name'",
+ "recovery_target_xid = '$recovery_txid'",
+ "recovery_target_time = '$recovery_time'"
+);
+test_recovery_standby('Name + XID + Time', $node_master,
+ \@recovery_params,
+ "3000", $lsn3);
+@recovery_params = (
+ "recovery_target_time = '$recovery_time'",
+ "recovery_target_name = '$recovery_name'",
+ "recovery_target_xid = '$recovery_txid'"
+);
+test_recovery_standby('Time + Name + XID', $node_master,
+ \@recovery_params,
+ "2000", $lsn2);
+@recovery_params = (
+ "recovery_target_xid = '$recovery_txid'",
+ "recovery_target_time = '$recovery_time'",
+ "recovery_target_name = '$recovery_name'"
+);
+test_recovery_standby('XID + Time + Name', $node_master,
+ \@recovery_params,
+ "4000", $lsn4);
diff --git a/src/test/recovery/t/004_timeline_switch.pl b/src/test/recovery/t/004_timeline_switch.pl
new file mode 100644
index 0000000..d32797c
--- /dev/null
+++ b/src/test/recovery/t/004_timeline_switch.pl
@@ -0,0 +1,66 @@
+# Tets for timeline switch
+# Encure that a standby is able to follow a newly-promoted standby
+# on a new timeline.
+use strict;
+use warnings;
+use File::Path qw(remove_tree);
+use PostgresNode;
+use TestLib;
+use Test::More tests => 1;
+
+use RecoveryTest;
+
+$ENV{PGDATABASE} = 'postgres';
+
+# Initialize master node
+my $node_master = make_master();
+$node_master->start;
+
+# Take backup
+my $backup_name = 'my_backup';
+$node_master->backup($backup_name);
+
+# Create two standbys linking to it
+my $node_standby_1 = make_stream_standby($node_master, $backup_name);
+$node_standby_1->start;
+my $node_standby_2 = make_stream_standby($node_master, $backup_name);
+$node_standby_2->start;
+
+# Create some content on master
+$node_master->psql('postgres',
+ "CREATE TABLE tab_int AS SELECT generate_series(1,1000) AS a");
+my $until_lsn = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+
+# Wait until standby has replayed enough data on standby 1
+my $caughtup_query = "SELECT '$until_lsn'::pg_lsn <= pg_last_xlog_replay_location()";
+$node_standby_1->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby to catch up";
+
+# Stop and remove master, and promote standby 1, switching it to a new timeline
+$node_master->teardown_node;
+system_or_bail('pg_ctl', '-w', '-D', $node_standby_1->data_dir,
+ 'promote');
+print "# Promoted standby 1\n";
+
+# Switch standby 2 to replay from standby 1
+remove_tree($node_standby_2->data_dir . '/recovery.conf');
+my $connstr_1 = $node_standby_1->connstr;
+$node_standby_2->append_conf('recovery.conf', qq(
+primary_conninfo='$connstr_1'
+standby_mode=on
+recovery_target_timeline='latest'
+));
+$node_standby_2->restart;
+
+# Insert some data in standby 1 and check its presence in standby 2
+# to ensure that the timeline switch has been done. Standby 1 needs
+# to exit recovery first before moving on with the test.
+$node_standby_1->poll_query_until('postgres', "SELECT pg_is_in_recovery() <> true");
+$node_standby_1->psql('postgres', "INSERT INTO tab_int VALUES (generate_series(1001,2000))");
+$until_lsn = $node_standby_1->psql('postgres', "SELECT pg_current_xlog_location();");
+$caughtup_query = "SELECT '$until_lsn'::pg_lsn <= pg_last_xlog_replay_location()";
+$node_standby_2->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby to catch up";
+
+my $result = $node_standby_2->psql('postgres', "SELECT count(*) FROM tab_int");
+is($result, qq(2000), 'check content of standby 2');
diff --git a/src/test/recovery/t/005_replay_delay.pl b/src/test/recovery/t/005_replay_delay.pl
new file mode 100644
index 0000000..0000c02
--- /dev/null
+++ b/src/test/recovery/t/005_replay_delay.pl
@@ -0,0 +1,41 @@
+# Checks for recovery_min_apply_delay
+use strict;
+use warnings;
+use TestLib;
+use Test::More tests => 2;
+
+use RecoveryTest;
+
+# Initialize master node
+my $node_master = make_master();
+$node_master->start;
+
+# And some content
+$node_master->psql('postgres', "CREATE TABLE tab_int AS SELECT generate_series(1,10) AS a");
+
+# Take backup
+my $backup_name = 'my_backup';
+$node_master->backup($backup_name);
+
+# Create streaming standby from backup
+my $node_standby = make_stream_standby($node_master, $backup_name);
+$node_standby->append_conf('recovery.conf', qq(
+recovery_min_apply_delay = '2s'
+));
+$node_standby->start;
+
+# Make new content on master and check its presence in standby
+# depending on the delay of 2s applied above.
+$node_master->psql('postgres', "INSERT INTO tab_int VALUES (generate_series(11,20))");
+sleep 1;
+# Here we should have only 10 rows
+my $result = $node_standby->psql('postgres', "SELECT count(*) FROM tab_int");
+is($result, qq(10), 'check content with delay of 1s');
+
+# Now wait for replay to complete on standby
+my $until_lsn = $node_master->psql('postgres', "SELECT pg_current_xlog_location();");
+my $caughtup_query = "SELECT '$until_lsn'::pg_lsn <= pg_last_xlog_replay_location()";
+$node_standby->poll_query_until('postgres', $caughtup_query)
+ or die "Timed out while waiting for standby to catch up";
+$result = $node_standby->psql('postgres', "SELECT count(*) FROM tab_int");
+is($result, qq(20), 'check content with delay of 2s');
--
2.6.3
--
Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
