On Thu, May 16, 2013 at 1:34 PM, Jeff Janes <jeff.ja...@gmail.com> wrote: > On Thu, May 16, 2013 at 7:46 AM, Cuong Hoang <climbingr...@gmail.com> wrote: >> >> Hi all, >> >> Our application is heavy write and IO utilisation has been the problem for >> us for a while. We've decided to use RAID 10 of 4x500GB Samsung 840 Pro for >> the master server. I'm aware of write cache issue on SSDs in case of power >> loss. However, our hosting provider doesn't offer any other choices of SSD >> drives with supercapacitor. To minimise risk, we will also set up another >> RAID 10 SAS in streaming replication mode. For our application, a few >> seconds of data loss is acceptable. >> >> My question is, would corrupted data files on the primary server affect >> the streaming standby? In other word, is this setup acceptable in terms of >> minimising deficiency of SSDs? > > > > That seems rather scary to me for two reasons. > > If the data center has a sudden power failure, why would it not take out > both machines either simultaneously or in short succession? Can you verify > that the hosting provider does not have them on the same UPS (or even worse, > as two virtual machines on the same physical host)?
I took it to mean that his standby's "raid 10 SAS" meant disk drive based standby. Agree that server should not be configured to autostart through init.d. merlin -- Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-performance
