> autogen.sh:running:aclocal -I macros
> aclocal:configure.in:107:mscro 'AM_PATH_SDL' not found in library
> autogen.sh:error:while running aclocal
I've included in this message a file that you can put in the macros/
directory, which should solve your problem. (the other solution would be to
install SDL).
I'm interested to know if things work after this fix, especially if the
configure script can be run. (of course, I'm also interested to know if it
_doesn't_ work :-))
Regards,
Fr�d�ric
--
Fr�d�ric Gobry SMARTDATA
--- http://www.smartdata.ch
Software Engineer Lausanne - Switzerland
+41 21 693 84 98
# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
[dnl
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed
(optional)],
sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is
installed (optional)],
sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test
SDL program],
, enable_sdltest=yes)
if test x$sdl_exec_prefix != x ; then
sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
fi
fi
if test x$sdl_prefix != x ; then
sdl_args="$sdl_args --prefix=$sdl_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_prefix/bin/sdl-config
fi
fi
AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
min_sdl_version=ifelse([$1], ,0.11.0,$1)
AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
no_sdl=""
if test "$SDL_CONFIG" = "no" ; then
no_sdl=yes
else
SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_sdltest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
rm -f conf.sdltest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main (int argc, char *argv[])
{
int major, minor, micro;
char *tmp_version;
/* This hangs on some systems (?)
system ("touch conf.sdltest");
*/
{ FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_sdl_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_sdl_version");
exit(1);
}
if (($sdl_major_version > major) ||
(($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
(($sdl_major_version == major) && ($sdl_minor_version == minor) &&
($sdl_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum
version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it
is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
printf("*** to point to the correct copy of sdl-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_sdl" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$SDL_CONFIG" = "no" ; then
echo "*** The sdl-config script installed by SDL could not be found"
echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the SDL_CONFIG environment variable to the"
echo "*** full path to sdl-config."
else
if test -f conf.sdltest ; then
:
else
echo "*** Could not run SDL test program, checking why..."
CFLAGS="$CFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding SDL or finding the wrong"
echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to
point"
echo "*** to the installed location Also, make sure you have run ldconfig
if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it,
although"
echo "*** you may also be able to get things to work by modifying
LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file
config.log for the"
echo "*** exact error that occured. This usually means SDL was incorrectly
installed"
echo "*** or that you have moved SDL since it was installed. In the latter
case, you"
echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
SDL_CFLAGS=""
SDL_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(SDL_CFLAGS)
AC_SUBST(SDL_LIBS)
rm -f conf.sdltest
])
PGP signature
