Ross Ferson wrote:
sd_mod 13516 0 (unused) iscsi_module 153644 2 scsi_mod 107160 2 [sd_mod iscsi_module]
no actual scsi driver is loaded. Are you sure kudzu detected and configured the card?
[EMAIL PROTECTED] root]# cat /proc/scsi/scsi Attached devices: none
That's why you cannot mount antthing, the kerenl doesn't know there is HBVA there, and therefore doesn't know there are disks attached to it.
[EMAIL PROTECTED] root]#
The Card is an Adaptec AHA-2940U /UW/D AIC-7881U (taken straight from the pci section under control panel in KDE)
Do you want a simple short term solution or a long term one? So you plan to keep the card installed?
Short term solution:
# modprobe aic7xxx or # modprobe aic7xxx_old
Then the disk should be listed in /proc/scsi/scsi and can be mounted using /dev/sdaX.
#fdisk -l /dev/sda should list the partitions/filesystems on the disk.
This method is short term because you will have to manually load the driver ever time you boot the system and waht to use it.
-Thomas
-- Phoebe-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/phoebe-list
