Richard, The crank for your VV-XII is part number 3194BGP and is peculiar to only the XII (GP=Gold Plated) according to the VIctor Repair Parts listing.
The dimensions are described as follows: Length Bend to Bend 3-9/16" Length Bend to End 2-1/8" 1/4" Inside thread Unfortunately it is not clear if these are dimensions from the center or inside of the bends, maybe someone with a crank can verify these dimensions. I hope this helps identify and locate your parts. Best Regards, Mark > [Original Message] > From: Richard Rubin <[email protected]> > To: <[email protected]> > Date: 11/28/2005 7:37:07 PM > Subject: [Phono-L] Victrola XII crank > > Hi, all. I'm looking for a crank for my Victrola XII. Not only don't I > have the crank, but I've never actually seen one, so if anyone has one that > they don't want to sell but would be willing to send me a photo of it > (preferably with dimensions), I would appreciate it. I had thought, once > upon a time, that the crank from my tabletop XI would work, but the throw is > way too long. > > Oh, and if anyone has a spare foot lying around, I could use that, too > (although I've already made a repro). And a keyhole escutcheon (this is for > the older-style XII). In fact, if you have any parts at all, let me know -- > I can always use spares. > > Thanks! > > > _______________________________________________ > Phono-L mailing list > [email protected] > > Phono-L Archive > http://www.oldcrank.org/pipermail/phono-l/
