On Jan 24, 2007, at 9:22 AM, "" <[email protected]> wrote: > > I have a Victor VV IV table top that the turn table does not want > to come off. Any suggestions?
This is generally a two person job. While a helper is lifting the turntable evenly, gently tap the top of the spindle with a hammer. Don't miss and hit the turntable... you may learn new vocabulary from your helper! Regards, Loran From [email protected] Wed Jan 24 11:35:00 2007 From: [email protected] ([email protected]) Date: Wed Jan 24 11:36:32 2007 Subject: [Phono-L] removing turn table & cleaning lead screw & half nut Message-ID: <[email protected]> I usually use a rubber mallet. It shouldn't flatten the top of the spindle like a hammer (I speak from experience)... John Robles -----Original Message----- From: Loran Hughes <[email protected]> Subj: Re: [Phono-L] removing turn table & cleaning lead screw & half nut Date: Wed Jan 24, 2007 10:44 am Size: 499 bytes To: Antique Phonograph List <[email protected]> On Jan 24, 2007, at 9:22 AM, "" <[email protected]> wrote: > > I have a Victor VV IV table top that the turn table does not want > to come off. Any suggestions? This is generally a two person job. While a helper is lifting the turntable evenly, gently tap the top of the spindle with a hammer. Don't miss and hit the turntable... you may learn new vocabulary from your helper! Regards, Loran _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
