Is using SAE 30 synthetic motor oil advisable to lube steel phonograph gears?
-----Original Message----- From: Rich <[email protected]> To: Antique Phonograph List <phono-l at oldcrank.org> Sent: Tue, 15 Jul 2008 5:05 pm Subject: Re: [Phono-L] AB's and gear oiling Most sewing machine oil is a pure very light weight mineral oil and usually is devoid of any R&O additive. It tends to oxidize over time to a carbon based varnish. R&O is Rust and Oxidation, rust for the metal that is lubed and oxidation for the lubricant. Clock oil is a much higher refined product and does contain additives. If it is synthetic clock oil it will last almost forever and does not creep. Spring oil is another clock item that the phono folks should pick up on. Springs in open barrels probably should be greased, use a synthetic grease or you will be doing the job again in a couple of years. Steven Medved wrote: > What is clock oil and how does it differ from sewing machine oil? > > Steve > > > >> Date: Tue, 15 Jul 2008 14:35:28 -0500> From: rich-mail at octoxol.com> To: phono-l at oldcrank.org> Subject: Re: [Phono-L] AB's and gear oiling> > Dissimilar metals are self lubricating - no lube required. Similar > metals require a very light coating of very pure oil, preferably synthetic.> > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org > > _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
