Wow..! We didn't make it back to cold cream... Mike Oldcranky On Fri, Apr 22, 2011 at 3:27 PM, Vinyl Visions <[email protected]>wrote:
> > Ammonia is DEFINITELY NOT A GOOD IDEA. Ammonia can be used as a paint > stripper - try some on an old cabinet to see what it does... it will remove > old varnish, shellac, plastic finishes, etc. Not a good thing on celluloid, > wax or shellac records. > > > Date: Fri, 22 Apr 2011 16:30:58 -0500 > > From: [email protected] > > To: [email protected] > > Subject: Re: [Phono-L] Blue Amberol cleaning > > > > Do some googling for nitrocellulose base film or negative cleaner. I > > suspect that ammonia is not real good on it.There usual selection of > > household cleaners do not strike me as the thing to use. > > > > Wax records can be cleaned in lab glassware cleaner or the Beer Glass > > Cleaner for hand washing just as well. > > > > Any temperature differential across the 4min wax will result in instant > > disassembly. > > > > Windex is for windows. > > > > On 04/22/2011 11:08 AM, Ron L'Herault wrote: > > > I've cleaned off blue Amberols with Windex with no visible or audible > > > damage. Spray on, wipe off. > > > > > > Ron L > > > > > > -----Original Message----- > > > From: [email protected] [mailto: > [email protected]] On > > > Behalf Of Bruce Mercer > > > Sent: Friday, April 22, 2011 12:02 PM > > > To: Antique Phonograph List > > > Subject: [Phono-L] Blue Amberol cleaning > > > > > > I'm sure most on this group know a safe and effective way to clean a 4 > min. > > > BA or any celluloid cylinder. Obviously do not get the interior wet but > can > > > water on a cloth with a little dish washing detergent followed by a > thorough > > > 'rinse' and a careful cloth 'drying' be the way to go about it? Being a > DD > > > collector I don't think celluloid would do to well using the same thing > I > > > clean DD with. :-) > > > What about the earlier 4 min. black Amberols that are so fragile? Can I > use > > > the same process and materials used for celluloid? > > > I'm finally setting up my cylinder machine after Steve rebuilt the > > > reproducer for me. It's been stored away far too many years. > > > Thanks in advance for any suggestions. > > > Bruce Mercer > > > _______________________________________________ > > > Phono-L mailing list > > > http://phono-l.oldcrank.org > > > > > > _______________________________________________ > > > Phono-L mailing list > > > http://phono-l.oldcrank.org > > > > > > > > _______________________________________________ > > Phono-L mailing list > > http://phono-l.oldcrank.org > > _______________________________________________ > Phono-L mailing list > http://phono-l.oldcrank.org > _______________________________________________ Phono-L mailing list http://phono-l.oldcrank.org
