Steve: Thanks
Bob -----Original Message----- From: phono-l-boun...@oldcrank.org [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Steven Medved Sent: Monday, October 10, 2011 1:38 PM To: phono-l@oldcrank.org Subject: Re: [Phono-L] converting an Amberola 30 to using a Amberola 50 mechanism You cannot use two 30 barrels as the 50 barrels come as an assembly and you need the 50 winder. The springs are the same, but the double spring 50 and the double spring DD barrels come as one unit and that one 50 unit cannot be made from two 30 barrels. Steve > From: maff...@bresnan.net > To: phono-l@oldcrank.org > Date: Mon, 10 Oct 2011 12:36:33 -0600 > Subject: Re: [Phono-L] converting an Amberola 30 to using a Amberola 50 mechanism > > Steven: > > Would using 2 Amberola 30 Spring Barrels be the same as "the 50 spring > barrels"? > > If not what would be the problem & what changes or modifications would be > needed other than adding the 2 screw winder to accommodate the space change > from 1 to 2 barrels? > > Later > > Bob > -----Original Message----- > From: phono-l-boun...@oldcrank.org [mailto:phono-l-boun...@oldcrank.org] On > Behalf Of Steven Medved > Sent: Monday, October 10, 2011 11:48 AM > To: phono-l@oldcrank.org > Subject: Re: [Phono-L] converting an Amberola 30 to using a Amberola 50 > mechanism > > > The spring barrels come as a set so you have to swap the barrel(s) and the > winder. The single spring winder has 4 screws the double has 2 screws and > most boards are dilled universal. You still have to swap the hook that > holds the spring that goes from the horn to the motor board. The DD motors > are the same with the exception of the spring which the DD motor does not > have so you can make a single spring motor a double, even some Edison > machines are found with double springs when the came with singles. Steve > > From: b...@taney.com > > Date: Mon, 10 Oct 2011 12:18:41 -0500 > > To: phono-l@oldcrank.org > > Subject: Re: [Phono-L] converting an Amberola 30 to using a Amberola 50 > mechanism > > > > My understanding is you don't even need to swap mechanisms, you can > install a second spring barrel in a model 30 and have the same result. > > Bill > > > > On Oct 10, 2011, at 11:59 AM, Bob Maffit wrote: > > > > > Phono Folks: > > > > > > > > > > > > I have heard in the past that one can take an Edison Amberola 50 > mechanism > > > and drop it in an Amberola 30 case with no problem, and have a machine > (sort > > > of a hotrod" which has the attributes' of the longer playing 50 in a > smaller > > > case. Is this so? > > > > > > > > > > > > What modifications if any, is needed to do this? Discussion regarding > this > > > matter would be appreciated. > > > > > > > > > > > > later > > > > > > > > > > > > Bob > > > > > > _______________________________________________ > > > Phono-L mailing list > > > http://phono-l.org > > > > _______________________________________________ > > Phono-L mailing list > > http://phono-l.org > > _______________________________________________ > Phono-L mailing list > http://phono-l.org > > _______________________________________________ > Phono-L mailing list > http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org
