Spray them with a rust dissolver or soak the whole thing in kerosene for a few hours. Then, make sure you use the correct screwdriver... a gun screwdriver set or micro screwdriver set is best. To get some extra torque on the screw, use vise grips fastened to the screwdriver shaft using one hand, while pressing down firmly on the handle of the screwdriver with the other hand - then twist. Hope this helps.
> Date: Sat, 22 Oct 2011 10:45:06 -0700 > From: [email protected] > To: [email protected] > Subject: [Phono-L] Help - Stubborn governor weights > > Hello all > I need to replace the governor springs on a Victor II. I have removed the > weights and springs from the shaft, but the small screws that connect the > weight to the springs will not budge. What do you all recommend to get them > loose? They are really tight and I don't want to strip the screwheads. > Thanks > John Robles > _______________________________________________ > Phono-L mailing list > http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org
