Thanks Melissa and Nick! Luckily the screw head is fairly deep, not like those danged screws on the back of a Victrola no. 2 reproducer. I always manage to wreck one of the four!!
John ________________________________ From: Melissa Ricci <[email protected]> To: Antique Phonograph List <[email protected]> Sent: Saturday, October 22, 2011 11:31 AM Subject: Re: [Phono-L] Help - Stubborn governor weights Hi John, Nick and I have had great success getting those stubborn screws out with this easy method. Use the correct size screwdriver which is quite small. Attach a pair of vise-grips to the screwdriver handle and use the grips to turn the screwdriver as you apply pressure. It works every time for us! The vise-grips give you just enough leverage to do the job and not strip the tiny screw. Good Luck! Melissa --- On Sat, 10/22/11, john robles <[email protected]> wrote: From: john robles <[email protected]> Subject: [Phono-L] Help - Stubborn governor weights To: "phonolist" <[email protected]> Date: Saturday, October 22, 2011, 1:45 PM Hello all I need to replace the governor springs on a Victor II. I have removed the weights and springs from the shaft, but the small screws that connect the weight to the springs will not budge. What do you all recommend to get them loose? They are really tight and I don't want to strip the screwheads. Thanks John Robles _______________________________________________ Phono-L mailing list http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org
