There should be a head size chart on the BoltDepot or McMaster-Carr site and the OEM screws I have her in an original horn measure 0.153"-0.155". Any chart you find if it does not list the odd numbers you can still figure out which one it is. I just measured a new production brass round head slotted screw and the head on a #2 size is 0.155" which when polished and plated will be about as close as you can get. Just the usual exception to odd number screws ...

Rich

On 11/05/2014 10:09 AM, Antique Phonograph List wrote:
Richat the site you linked the screws start at 0 and go up.  Witch one do you 
think is bestThanks.\

      On Wednesday, November 5, 2014 10:19 AM, Antique Phonograph List 
<[email protected]> wrote:


  When those horns were made the general standard of use was to use the
ODD number screws, 1, 3, 5, 7, etc. The present day common usage is to
use the even numbers, 2, 4, 6, etc. The original screws are nickel
plated brass or steel odd number screws. ODD number slotted round head
screws is not the problem, the nickel plating is. Using electroless
nickel plating kit is the easy way tog et them looking nice and new. Buy
a box so you have plenty and the shipping is a killer so see if you can
stock up.
https://www.boltdepot.com/Wood_screws_Slotted_round_head_Brass.aspx

Rich

On 11/05/2014 07:59 AM, Antique Phonograph List wrote:
Steve,  It's been quite some time since I have spoken to Eduardo and his family 
in Peru.  We used to use Skype and have long talks.  I miss that!  But I also 
sent him a message too.ThanksKenneth

       On Tuesday, November 4, 2014 3:40 AM, Antique Phonograph List 
<[email protected]> wrote:



     I need 8 screws in total, 4 for the hanging bracket above the decal and 4 
for the wood grained goose neck connector ring. If you do not have any you can 
sell me then would you please let me know the size I need and the best place to 
get them off the web?




Thanks so much in advance,

Kenneth Keeton




PS; in the mean time if anyone else knows where to get the screws I need it 
would be very helpful
_______________________________________________
Phono-L mailing list
http://phono-l.org


_______________________________________________
Phono-L mailing list
http://phono-l.org

_______________________________________________
Phono-L mailing list
http://phono-l.org



_______________________________________________
Phono-L mailing list
http://phono-l.org

_______________________________________________
Phono-L mailing list
http://phono-l.org

Reply via email to