[Filesystem] --- https://www.pld-linux.org/docs/man/installing_pld_linux_based_on_rescue_cd?rev=1548094158 +++ https://www.pld-linux.org/docs/man/installing_pld_linux_based_on_rescue_cd?rev=1548094749 @@ -16,25 +16,22 @@ ===== Filesystem ===== - Initiate swap space - + Initiate swap space: <file># mkswap /dev/sda1 </file> - Make filesystem (ex. ext3) - <file># mkfs.ext3 /dev/sda2 + Make filesystem (ex. ext4): + <file># mkfs.ext4 /dev/sda2 </file> - We need to create mountpoint, and mounnt partition into it. + We need to create mountpoint and mount partition into it: <file># mkdir /pld - # mount /dev/hda2 /pld + # mount /dev/sda2 /pld </file> - If We want to use more partitions (ex. /boot), We need to mount it too. - - + If more partitions are going to be used (like you want to have separate /boot or /home) then these need to be mounted now, too. ===== Network configuration ===== ''RescueCd'' should configure (using DHCP) our network automatically during a boot process. If DHCP is not present, We need to do it manually. Let's assume We want to set IP to 192.168.0.2. **/etc/sysconfig/interfaces/ifcfg-eth0** should looks like: <file>DEVICE=eth0
Diff URL: https://www.pld-linux.org/docs/man/installing_pld_linux_based_on_rescue_cd?do=diff&r1=1548094158&r2=1548094749 -- This mail was generated by DokuWiki at https://www.pld-linux.org/ _______________________________________________ pld-cvs-commit mailing list [email protected] http://lists.pld-linux.org/mailman/listinfo/pld-cvs-commit
