>a teraz:
>
>
># hdparm -i /dev/hda
/dev/hda:
Model=WDC WD800JB-00ETA0, FwRev=77.07W77, SerialNo=WD-WCAHL3614614
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs
FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16,
MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
po opcjach: # /sbin/hdparm -c1 -d1 -X66 -m16 -a16 -u1 /dev/hda
--
Pozdrowienia,
Piotr Gieron mailto:[EMAIL PROTECTED] jid:[EMAIL PROTECTED]
_________________________________________
http://pld-linux.org/ = faq, howto, newsy
dostales tutaj odpowiedz na swoje pytanie?
podziel sie z innymi i dopisz do FAQ!
http://pld-linux.org/FAQ/
