Hi,
Does CD-ROM access work in plex86? I installed CD-ROM drivers under DOS
6.22 in plex86 but it doesn't work. I'm using the following line to
specify the CD-ROM in my configuration file:
bochs-opt cdromd: dev="/dev/cdrom", status=inserted
Here is the output:
Processing command-line options
Opening VM (/dev/plex86)
Processing configuration script ../conf/mike
Allocating 16MB of physical memory in VM
Mapping virtualized physical memory into monitor
Zeroing virtualized physical memory
Mapping monitor print buffer into user mem.
bochs: ips = 1000000
unmapped_c::init: IGNORING unmapped ports
bochs: [cmos] Setting initial clock to: Tue Sep 28 22:12:35 1999
disk: Experimental CDROM on target 1
disk: Media not present in CD-ROM drive
bochs: Opening image for device 0
bochs: bx_options.floppy_command_delay = 500
vga construct static
bochs: font_width = 8
bochs: font_height = 16
bochs: default_depth = 16
bochs: waiting for MapNotify
bochs: MapNotify found.
bochs: vga: interval=300000
vga init called
bochs: TTY not used, serial port is not connected
replaying IO events from log file '../misc/vga_io.log'.
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
ROM: loading image '../bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536
bytes)
ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
Setting prescan depth to 3
Initializing plugins
Running VM
bochs: timer0 period set to 18 hz
bochs: CMOS: write reg 14h: value = 05h
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write 3c0: address mode reg=16
bochs: vga: io write 3c0: address mode reg=17
bochs: vga: io write 3c0: address mode reg=18
bochs: vga: io write 3c0: address mode reg=19
bochs: vga: io write 3c0: address mode reg=20
bochs: *** io read 3c5 case 1: sequencer clocking mode
bochs: vga: io write: 3cf: reg 05: value = 10h
bochs: *** io read 3c5 case 1: sequencer clocking mode
::SetCR0: NE=0
::SetCR0: NE=0
::write_virtual_checks EXCEPTION: seg=0 0:100000 + 4
bochs: disk: Not implemented command
bochs: disk: aborting on command 0xa0 {DISK}
bochs: panic, disk: IO read(1f0h) with drq == 0: last command was a0h
============ begin VGA text buffer dump ===============
============ end VGA text buffer dump ===============
Shutting down plugins
bochs: Note: X11: bx_gui_c::exit() not implemented yet.
Unmapping guest physical memory.
Unmapping monitor print buffer.
Tearing down VM
Closing VM
