I'm testing the CD-ROM stuff right now......., don't expect it to work right
quite yet though.......
Drew Northup, N1XIM
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
> Of Michael Madore
> Sent: Saturday, November 18, 2000 8:47 AM
> To: [EMAIL PROTECTED]
> Subject: CD-ROM Access
>
>
> Hi,
>
> Does CD-ROM access work in plex86? I installed CD-ROM drivers under DOS
> 6.22 in plex86 but it doesn't work. I'm using the following line to
> specify the CD-ROM in my configuration file:
>
> bochs-opt cdromd: dev="/dev/cdrom", status=inserted
>
> Here is the output:
>
> Processing command-line options
> Opening VM (/dev/plex86)
> Processing configuration script ../conf/mike
> Allocating 16MB of physical memory in VM
> Mapping virtualized physical memory into monitor
> Zeroing virtualized physical memory
> Mapping monitor print buffer into user mem.
> bochs: ips = 1000000
> unmapped_c::init: IGNORING unmapped ports
> bochs: [cmos] Setting initial clock to: Tue Sep 28 22:12:35 1999
> disk: Experimental CDROM on target 1
> disk: Media not present in CD-ROM drive
> bochs: Opening image for device 0
> bochs: bx_options.floppy_command_delay = 500
> vga construct static
> bochs: font_width = 8
> bochs: font_height = 16
> bochs: default_depth = 16
> bochs: waiting for MapNotify
> bochs: MapNotify found.
> bochs: vga: interval=300000
> vga init called
> bochs: TTY not used, serial port is not connected
> replaying IO events from log file '../misc/vga_io.log'.
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write 3c0: address mode reg=16
> bochs: vga: io write 3c0: address mode reg=17
> bochs: vga: io write 3c0: address mode reg=18
> bochs: vga: io write 3c0: address mode reg=19
> bochs: vga: io write 3c0: address mode reg=20
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> ROM: loading image '../bios/BIOS-plex86-2000_0817a' @ 0xf0000 (65536
> bytes)
> ROM: loading image '../bios/VGABIOS-elpin-2.40' @ 0xc0000 (32768 bytes)
> Setting prescan depth to 3
> Initializing plugins
> Running VM
> bochs: timer0 period set to 18 hz
> bochs: CMOS: write reg 14h: value = 05h
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write 3c0: address mode reg=16
> bochs: vga: io write 3c0: address mode reg=17
> bochs: vga: io write 3c0: address mode reg=18
> bochs: vga: io write 3c0: address mode reg=19
> bochs: vga: io write 3c0: address mode reg=20
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> ::SetCR0: NE=0
>
> ::SetCR0: NE=0
>
> ::write_virtual_checks EXCEPTION: seg=0 0:100000 + 4
>
> bochs: disk: Not implemented command
> bochs: disk: aborting on command 0xa0 {DISK}
> bochs: panic, disk: IO read(1f0h) with drq == 0: last command was a0h
> ============ begin VGA text buffer dump ===============
> ============ end VGA text buffer dump ===============
> Shutting down plugins
> bochs: Note: X11: bx_gui_c::exit() not implemented yet.
> Unmapping guest physical memory.
> Unmapping monitor print buffer.
> Tearing down VM
> Closing VM
>
>
>
