I second that as well. I can boot dos but trying to run the windows 98
setup even with everything I know how to turn off turned off crashes
before the first gui comes up. I figured it just wasn't baked enough to
run it yet, come back later when the cake rises. Is this correct?
-andy
Brian R. Gaeke wrote:
> With current CVS, I seem to get an abortive exit running pretty much anything.
> I have attached some error messages (in this case, from trying to boot DR-DOS.)
> It looks liks something isn't getting mapped properly, but it's hard for me
> to tell what.
>
> Any clues?
>
> -Brian
>
>
> Processed 76 lines of config file 'local/plex86.conf'
> Initializing plugins
> Running VM
> ::init_monitor OK -----------------
> nexus_size = 0x24E
>
> bochs: CMOS: write reg 14h: value = 04h
> ::sysIOOut: No handler defined for port 0x46E8 (data=0x16).
>
> ::sysIOOut: No handler defined for port 0x102 (data=0x1).
>
> ::sysIOOut: No handler defined for port 0x4AE8 (data=0x0).
>
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write 3c0: address mode reg=16
> bochs: vga: io write 3c0: address mode reg=17
> bochs: vga: io write 3c0: address mode reg=18
> bochs: vga: io write 3c0: address mode reg=19
> bochs: vga: io write 3c0: address mode reg=20
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> bochs: vga: io write: 3cf: reg 05: value = 10h
> bochs: *** io read 3c5 case 1: sequencer clocking mode
> ::plex86 panic:
> ::emulate:1 default case of 3
>
> Fatal monitor error caused Panic
> eax:0xf8000
> ebx:0x7c00
> ecx:0xf0001
> edx:0xf000
> ebp:0xfff8
> esi:0x0
> edi:0x500
> esp:0xc
> eflags:0x7046
> eip:0x300ad0
> cs:s=0xff53, dl=0xf530ffff, dh=0x9b0f, valid=1
> ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
> ds:s=0xff53, dl=0xf530ffff, dh=0x930f, valid=1
> es:s=0x0, dl=0xffff, dh=0x9300, valid=1
> fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
> tr:s=0x0, dl=0x0, dh=0x0, valid=0
> gdtr:base=0x0, limit=0x0
> idtr:base=0x0, limit=0x3ff
> dr0:0x0
> dr1:0x0
> dr2:0x0
> dr3:0x0
> dr6:0xffff0ff0
> dr7:0x400
> tr3:0x0
> tr4:0x0
> tr5:0x0
> tr6:0x0
> tr7:0x0
> cr0:0x60000032
> cr1:0x0
> cr2:0x0
> cr3:0x0
> cr4:0x0
> inhibit_mask:0
> Stack dump:
> Current instruction:
> FF53.00300AD0 7F45 ljg $0xff53, $0x0b17
>
> Shutting down plugins
> bochs: Note: X11: bx_gui_c::exit() not implemented yet.
> Unmapping guest physical memory.
> Unmapping monitor print buffer.
> Tearing down VM
> Closing VM
>
>
--
www.superlinksoftware.com
www.sourceforge.net/projects/poi - port of Excel format to java
http://developer.java.sun.com/developer/bugParade/bugs/4487555.html
- fix java generics!
