I never did manage to get Windows installed through Plex, I had to boot up
Bochs to install then use Plex to boot it. The amusing thing is that at the
moment, Bochs is faster than Plex. Must be my settings in plex. It's looking
good though :) It doesn't look like it will be too terribly long before it's
as good as VMware. :)
Scott Holder
----- Original Message -----
From: "Andrew C. Oliver" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 02, 2001 6:54 PM
Subject: Re: [plex86] abortive exit running anything
> I second that as well. I can boot dos but trying to run the windows 98
> setup even with everything I know how to turn off turned off crashes
> before the first gui comes up. I figured it just wasn't baked enough to
> run it yet, come back later when the cake rises. Is this correct?
>
> -andy
>
> Brian R. Gaeke wrote:
> > With current CVS, I seem to get an abortive exit running pretty much
anything.
> > I have attached some error messages (in this case, from trying to boot
DR-DOS.)
> > It looks liks something isn't getting mapped properly, but it's hard for
me
> > to tell what.
> >
> > Any clues?
> >
> > -Brian
> >
> >
> > Processed 76 lines of config file 'local/plex86.conf'
> > Initializing plugins
> > Running VM
> > ::init_monitor OK -----------------
> > nexus_size = 0x24E
> >
> > bochs: CMOS: write reg 14h: value = 04h
> > ::sysIOOut: No handler defined for port 0x46E8 (data=0x16).
> >
> > ::sysIOOut: No handler defined for port 0x102 (data=0x1).
> >
> > ::sysIOOut: No handler defined for port 0x4AE8 (data=0x0).
> >
> > bochs: vga: io write: 3cf: reg 05: value = 10h
> > bochs: vga: io write: 3da: ignoring: feature ctrl & vert sync
> > bochs: *** io read 3c5 case 1: sequencer clocking mode
> > bochs: vga: io write 3c0: address mode reg=16
> > bochs: vga: io write 3c0: address mode reg=17
> > bochs: vga: io write 3c0: address mode reg=18
> > bochs: vga: io write 3c0: address mode reg=19
> > bochs: vga: io write 3c0: address mode reg=20
> > bochs: *** io read 3c5 case 1: sequencer clocking mode
> > bochs: vga: io write: 3cf: reg 05: value = 10h
> > bochs: *** io read 3c5 case 1: sequencer clocking mode
> > ::plex86 panic:
> > ::emulate:1 default case of 3
> >
> > Fatal monitor error caused Panic
> > eax:0xf8000
> > ebx:0x7c00
> > ecx:0xf0001
> > edx:0xf000
> > ebp:0xfff8
> > esi:0x0
> > edi:0x500
> > esp:0xc
> > eflags:0x7046
> > eip:0x300ad0
> > cs:s=0xff53, dl=0xf530ffff, dh=0x9b0f, valid=1
> > ss:s=0x0, dl=0xffff, dh=0x9300, valid=1
> > ds:s=0xff53, dl=0xf530ffff, dh=0x930f, valid=1
> > es:s=0x0, dl=0xffff, dh=0x9300, valid=1
> > fs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> > gs:s=0x0, dl=0xffff, dh=0x9300, valid=1
> > ldtr:s=0x0, dl=0x0, dh=0x0, valid=0
> > tr:s=0x0, dl=0x0, dh=0x0, valid=0
> > gdtr:base=0x0, limit=0x0
> > idtr:base=0x0, limit=0x3ff
> > dr0:0x0
> > dr1:0x0
> > dr2:0x0
> > dr3:0x0
> > dr6:0xffff0ff0
> > dr7:0x400
> > tr3:0x0
> > tr4:0x0
> > tr5:0x0
> > tr6:0x0
> > tr7:0x0
> > cr0:0x60000032
> > cr1:0x0
> > cr2:0x0
> > cr3:0x0
> > cr4:0x0
> > inhibit_mask:0
> > Stack dump:
> > Current instruction:
> > FF53.00300AD0 7F45 ljg $0xff53, $0x0b17
> >
> > Shutting down plugins
> > bochs: Note: X11: bx_gui_c::exit() not implemented yet.
> > Unmapping guest physical memory.
> > Unmapping monitor print buffer.
> > Tearing down VM
> > Closing VM
> >
> >
>
>
>
> --
> www.superlinksoftware.com
> www.sourceforge.net/projects/poi - port of Excel format to java
> http://developer.java.sun.com/developer/bugParade/bugs/4487555.html
> - fix java generics!
>
>
