Just a note, the easiest way to get setup quickly is to use the unified installer http://plone.org/products/plone/releases/4.1.5
What you're now running up against is not having the required lxml libraries. for ubuntu what I *think* you'll need is something like this: sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-dev In your eggs section you might also want to include "Pillow" -Nathan On Tue, Jun 5, 2012 at 11:50 AM, Aaron Rothenberg <[email protected]> wrote: > > So I tried ./bin/buildout -vv as per the suggestions. > > I re installed Ubuntu 11.10 with all the appropriate additions for Plone and > python. Also, I am using a different minimal buildout (below) which had > previously worked with the Ubuntu system python(2.7.2) . It doesn't work > anymore with the local 2.6* python. > > This is the end of the output > > Getting required 'lxml>=2.2.4' > required by plone.app.theming 1.0. > We have no distributions for lxml that satisfies 'lxml>=2.2.4'. > Getting distribution for 'lxml>=2.2.4'. > Running easy_install: > /home/aaron/.pythonbrew/venvs/Python-2.6/plone-python/bin/python "-c" "from > setuptools.command.easy_install import main;main()" "-mUNxd" > "/home/aaron/Plone4Book/MinimalBuildout/eggs/tmp2F9qTX" > "/tmp/tmpBO4LaDget_dist/lxml-2.3.4.tgz" > path=/home/aaron/Plone4Book/MinimalBuildout/eggs/setuptools-0.6c12dev_r88846-py2.6.egg > > Processing lxml-2.3.4.tgz > Running lxml-2.3.4/setup.py -q bdist_egg --dist-dir > /tmp/easy_install-JnFTNn/lxml-2.3.4/egg-dist-tmp-biCF11 > Building lxml version 2.3.4. > Building without Cython. > ERROR: /bin/sh: xslt-config: not found > > ** make sure the development packages of libxml2 and libxslt are installed > ** > > Using build configuration of libxslt > In file included from src/lxml/lxml.etree.c:239:0: > src/lxml/etree_defs.h:9:31: fatal error: libxml/xmlversion.h: No such file > or directory > compilation terminated. > error: Setup script exited with error: command 'gcc' failed with exit status > 1 > An error occurred when trying to install lxml 2.3.4. Look above this message > for any errors that were output by easy_install. > While: > Installing instance. > Getting distribution for 'lxml>=2.2.4'. > Error: Couldn't install: lxml 2.3.4 > > > > here's what I did from the start > pythonbrew install 2.6 > then > pythonbrew switch 2.6 > then > cd MyPloneProject (where I have bootstrap.p and buildout.cfg) > then > python bootstrap.py --distribute > then > bin/buildout -vv > > I also tried python 2.6.6,2.6.7 to run the bootstrap. > > I get this early on > We have no distributions for ZODB3 that satisfies 'ZODB3>=3.9'. > > also I get a lot of these > Note also that the installation directory must be on sys.path at runtime for > this to work. (e.g. by being the application's script directory, by being > on > PYTHONPATH, or by being added to sys.path by your code.) > > Here is the buildout: > [buildout] > extends = > http://dist.plone.org/release/4.1/versions.cfg > parts = instance > [instance] > recipe = plone.recipe.zope2instance > user = admin:admin > eggs = Plone > > > Thanks for the help. > >> Date: Sun, 3 Jun 2012 16:37:58 -0500 > >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3 >> From: [email protected] >> To: [email protected] >> CC: [email protected] >> >> What buildout are you running? >> >> Can you try running ./bin/buildout -vv >> >> to see what error you are getting in detail? >> >> On Sun, Jun 3, 2012 at 1:09 PM, Aaron Rothenberg >> <[email protected]> wrote: >> > Thanks Nathan >> > >> > I do have the latest python-dev installation >> > >> > as per your suggestion, I used python-brew to install 2.6 and 2.6.6. I >> > used >> > both versions to bootstrap.(then /bin/buildout) >> > >> > I still get the same error and I still don't have anything new in bin( >> > I >> > was expecting at least "test" and "coverage"). >> > >> > I may try and re-install Ubuntu 11.04 and go with that. Might that help? >> > >> > Thanks again. >> > >> > >> > >> >> Date: Sun, 3 Jun 2012 00:42:06 -0500 >> >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3 >> >> From: [email protected] >> >> To: [email protected] >> >> CC: [email protected] >> > >> >> >> >> Do you have the python development package installed? >> >> >> >> sudo apt-get install python-dev >> >> >> >> If you're doing a buildout of plone 4.1, python 2.6 is what is >> >> supported for that version. >> >> >> >> >> >> Good luck, >> >> Nathan >> >> >> >> On Sat, Jun 2, 2012 at 10:47 PM, Aaron Rothenberg >> >> <[email protected]> wrote: >> >> > I'm using Martin Aspeli's chapter3 bootstrap and buildout >> >> > from Professional >> >> > Plone 4 >> >> > Development. >> >> > >> >> > I'm in Ubuntu 12.04 and I'm using python 2.7.2 (if that matters). >> >> > This >> >> > machine is dedicated to this project so I 'm free to do >> >> > anything necessary >> >> > to resolve this. >> >> > >> >> > The error is after I run bin/buildout from a myPloneProject folder. >> >> > >> >> > the Bin created after the bootstrap only has 1 buildout item >> >> > ("buildout") >> >> > in myPloneProject after the failed bin/buildout. >> >> > >> >> > here is the output- >> >> > Getting distribution for 'zope.interface==3.6.3'. >> >> > error: None >> >> > An error occured when trying to install zope.interface 3.6.3. Look >> >> > above >> >> > this message for any errors that were output by easy_install. >> >> > While: >> >> > Installing. >> >> > Getting section instance. >> >> > Initializing section instance. >> >> > Installing recipe plone.recipe.zope2instance. >> >> > Getting distribution for 'zope.interface==3.6.3'. >> >> > Error: Couldn't install: zope.interface 3.6.3 >> >> > *************** PICKED VERSIONS **************** >> >> > [versions] >> >> > >> >> > *************** /PICKED VERSIONS *************** >> >> > >> >> > note: I have 2 decades in development almost all in .net (some lamp) >> >> > but >> >> > I'm pretty new to python, eggs, buildouts... >> >> > >> >> > Thanks. >> >> > >> >> > >> >> > >> >> > _______________________________________________ >> >> > Setup mailing list >> >> > [email protected] >> >> > https://lists.plone.org/mailman/listinfo/plone-setup >> >> > >> > >> > _______________________________________________ >> > Setup mailing list >> > [email protected] >> > https://lists.plone.org/mailman/listinfo/plone-setup >> > > > _______________________________________________ > Setup mailing list > [email protected] > https://lists.plone.org/mailman/listinfo/plone-setup > _______________________________________________ Setup mailing list [email protected] https://lists.plone.org/mailman/listinfo/plone-setup
