In your eggs section you might also want to include "Pillow" I missed this. I'll try this first.
From: [email protected] To: [email protected] Date: Tue, 5 Jun 2012 13:15:15 -0500 Subject: [Setup] FW: Error: Couldn't install: zope.interface 3.6.3 Thanks I've already set up a plone test site with the unified installer. I used the system python2.7.2 and it worked fine. As for sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-devI noticed that it put some libs in the system pyhton2.7.2 path so ...?But that got me further. I now have the instance in bin but I get an error when I try and start the server. daemon manager not runningzopectl> This same minimal buildout worked before using the system python. note:From all I've seen local distributions of Python are the way to go so I'm committed to working in this manner. Also, I need to set up Aspeli's environment with his buildout or else I can't continue using his book that I bought. I know it's not recommended but I'm going to try over with a local 2.7 dist and see what happens. I'll also try the IRC and see if someone else has encountered these problems. Thanks again. > Date: Tue, 5 Jun 2012 11:57:22 -0500 > Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3 > From: [email protected] > To: [email protected] > CC: [email protected] > > Just a note, the easiest way to get setup quickly is to use the > unified installer http://plone.org/products/plone/releases/4.1.5 > > What you're now running up against is not having the required lxml libraries. > > for ubuntu what I *think* you'll need is something like this: > > sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-dev > > In your eggs section you might also want to include "Pillow" > > > -Nathan > > On Tue, Jun 5, 2012 at 11:50 AM, Aaron Rothenberg > <[email protected]> wrote: > > > > So I tried ./bin/buildout -vv as per the suggestions. > > > > I re installed Ubuntu 11.10 with all the appropriate additions for Plone and > > python. Also, I am using a different minimal buildout (below) which had > > previously worked with the Ubuntu system python(2.7.2) . It doesn't work > > anymore with the local 2.6* python. > > > > This is the end of the output > > > > Getting required 'lxml>=2.2.4' > > required by plone.app.theming 1.0. > > We have no distributions for lxml that satisfies 'lxml>=2.2.4'. > > Getting distribution for 'lxml>=2.2.4'. > > Running easy_install: > > /home/aaron/.pythonbrew/venvs/Python-2.6/plone-python/bin/python "-c" "from > > setuptools.command.easy_install import main;main()" "-mUNxd" > > "/home/aaron/Plone4Book/MinimalBuildout/eggs/tmp2F9qTX" > > "/tmp/tmpBO4LaDget_dist/lxml-2.3.4.tgz" > > path=/home/aaron/Plone4Book/MinimalBuildout/eggs/setuptools-0.6c12dev_r88846-py2.6.egg > > > > Processing lxml-2.3.4.tgz > > Running lxml-2.3.4/setup.py -q bdist_egg --dist-dir > > /tmp/easy_install-JnFTNn/lxml-2.3.4/egg-dist-tmp-biCF11 > > Building lxml version 2.3.4. > > Building without Cython. > > ERROR: /bin/sh: xslt-config: not found > > > > ** make sure the development packages of libxml2 and libxslt are installed > > ** > > > > Using build configuration of libxslt > > In file included from src/lxml/lxml.etree.c:239:0: > > src/lxml/etree_defs.h:9:31: fatal error: libxml/xmlversion.h: No such file > > or directory > > compilation terminated. > > error: Setup script exited with error: command 'gcc' failed with exit status > > 1 > > An error occurred when trying to install lxml 2.3.4. Look above this message > > for any errors that were output by easy_install. > > While: > > Installing instance. > > Getting distribution for 'lxml>=2.2.4'. > > Error: Couldn't install: lxml 2.3.4 > > > > > > > > here's what I did from the start > > pythonbrew install 2.6 > > then > > pythonbrew switch 2.6 > > then > > cd MyPloneProject (where I have bootstrap.p and buildout.cfg) > > then > > python bootstrap.py --distribute > > then > > bin/buildout -vv > > > > I also tried python 2.6.6,2.6.7 to run the bootstrap. > > > > I get this early on > > We have no distributions for ZODB3 that satisfies 'ZODB3>=3.9'. > > > > also I get a lot of these > > Note also that the installation directory must be on sys.path at runtime for > > this to work. (e.g. by being the application's script directory, by being > > on > > PYTHONPATH, or by being added to sys.path by your code.) > > > > Here is the buildout: > > [buildout] > > extends = > > http://dist.plone.org/release/4.1/versions.cfg > > parts = instance > > [instance] > > recipe = plone.recipe.zope2instance > > user = admin:admin > > eggs = Plone > > > > > > Thanks for the help. > > > >> Date: Sun, 3 Jun 2012 16:37:58 -0500 > > > >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3 > >> From: [email protected] > >> To: [email protected] > >> CC: [email protected] > >> > >> What buildout are you running? > >> > >> Can you try running ./bin/buildout -vv > >> > >> to see what error you are getting in detail? > >> > >> On Sun, Jun 3, 2012 at 1:09 PM, Aaron Rothenberg > >> <[email protected]> wrote: > >> > Thanks Nathan > >> > > >> > I do have the latest python-dev installation > >> > > >> > as per your suggestion, I used python-brew to install 2.6 and 2.6.6. I > >> > used > >> > both versions to bootstrap.(then /bin/buildout) > >> > > >> > I still get the same error and I still don't have anything new in bin( > >> > I > >> > was expecting at least "test" and "coverage"). > >> > > >> > I may try and re-install Ubuntu 11.04 and go with that. Might that help? > >> > > >> > Thanks again. > >> > > >> > > >> > > >> >> Date: Sun, 3 Jun 2012 00:42:06 -0500 > >> >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3 > >> >> From: [email protected] > >> >> To: [email protected] > >> >> CC: [email protected] > >> > > >> >> > >> >> Do you have the python development package installed? > >> >> > >> >> sudo apt-get install python-dev > >> >> > >> >> If you're doing a buildout of plone 4.1, python 2.6 is what is > >> >> supported for that version. > >> >> > >> >> > >> >> Good luck, > >> >> Nathan > >> >> > >> >> On Sat, Jun 2, 2012 at 10:47 PM, Aaron Rothenberg > >> >> <[email protected]> wrote: > >> >> > I'm using Martin Aspeli's chapter3 bootstrap and buildout > >> >> > from Professional > >> >> > Plone 4 > >> >> > Development. > >> >> > > >> >> > I'm in Ubuntu 12.04 and I'm using python 2.7.2 (if that matters). > >> >> > This > >> >> > machine is dedicated to this project so I 'm free to do > >> >> > anything necessary > >> >> > to resolve this. > >> >> > > >> >> > The error is after I run bin/buildout from a myPloneProject folder. > >> >> > > >> >> > the Bin created after the bootstrap only has 1 buildout item > >> >> > ("buildout") > >> >> > in myPloneProject after the failed bin/buildout. > >> >> > > >> >> > here is the output- > >> >> > Getting distribution for 'zope.interface==3.6.3'. > >> >> > error: None > >> >> > An error occured when trying to install zope.interface 3.6.3. Look > >> >> > above > >> >> > this message for any errors that were output by easy_install. > >> >> > While: > >> >> > Installing. > >> >> > Getting section instance. > >> >> > Initializing section instance. > >> >> > Installing recipe plone.recipe.zope2instance. > >> >> > Getting distribution for 'zope.interface==3.6.3'. > >> >> > Error: Couldn't install: zope.interface 3.6.3 > >> >> > *************** PICKED VERSIONS **************** > >> >> > [versions] > >> >> > > >> >> > *************** /PICKED VERSIONS *************** > >> >> > > >> >> > note: I have 2 decades in development almost all in .net (some lamp) > >> >> > but > >> >> > I'm pretty new to python, eggs, buildouts... > >> >> > > >> >> > Thanks. > >> >> > > >> >> > > >> >> > > >> >> > _______________________________________________ > >> >> > Setup mailing list > >> >> > [email protected] > >> >> > https://lists.plone.org/mailman/listinfo/plone-setup > >> >> > > >> > > >> > _______________________________________________ > >> > Setup mailing list > >> > [email protected] > >> > https://lists.plone.org/mailman/listinfo/plone-setup > >> > > > > > _______________________________________________ > > Setup mailing list > > [email protected] > > https://lists.plone.org/mailman/listinfo/plone-setup > > _______________________________________________ Setup mailing list [email protected] https://lists.plone.org/mailman/listinfo/plone-setup
_______________________________________________ Setup mailing list [email protected] https://lists.plone.org/mailman/listinfo/plone-setup
