Further to my previous report, this only seems to occur if you explicitly set the cmake build type, e.g. with -DCMAKE_BUILD_TYPE=Debug. This is probably why no-one has reported it before. Without this option the Qt library dependencies contain no type tags and so the problem does not occur. Not sure whether you would classify this as a cmake problem or a plplot problem. Either way it is irritating if you are trying to debug plplot problems.
Andrew On Thu, May 07, 2009 at 10:11:10AM +0100, Andrew Ross wrote: > > I think I have found a bug with our current cmake build system. For link > flags cmake now (with cmake 2.6.3 at least) adds a tag describing which > type of build this link flag is for. E.g. > plpotf77cd_LIB_DEPENDS:STATIC=general;plplotd; > > On the whole we seem to handle the general tag correctly, although I can't > see where this happens in plplot. > > For the qt drivers we get different libraries depending on the build type, > e.g. qt_LIB_DEPENDS contains > ;debug;/usr/lib/libQtSvg.so;optimized;/usr/lib/libQtSvg; > > This doesn't seem to cause any problems for the build, but if you look in > pkgcfg/plplotd-qt.pc then debug and optimized appear in the libs list. This > causes a build of the examples in the install tree to fail for anything > which uses pkg-config plplotd-qt. Normally this does not show up > (plplotd-qt.pc is not used). The problem becomes much more serious if you > try and do a build with ENABLE_DYNDRIVERS=OFF, because then all the driver > library dependencies end up in plplotd.pc, and so any plplot build using > pkg-config will fail. > > Alan, I don't fully understand all the cmake logic involved here. Can you > replicate this problem, and can you check to see if it is a problem with > our code. I can't see why general gets stripped out, but not optimized or > debug. > > Thanks > > Andrew > > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Plplot-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/plplot-devel > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Plplot-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/plplot-devel
