Hi Mayuresh! I've used realmagic IR device on kernel 2.6.
> Debug messages from the driver do show different values being read on > pressing different keys on the remote, but neither 'cat /dev/lirc' nor > any of the tools based on lircd (irw etc). Since you mentioned the driver dbg messages do show some activity, I think editing /etc/lircd.conf should solve your problem. Try using irrecord to create a custom lircd.conf. Backup your existing /etc/lircd.conf and copy the newly created config file in that place. Restart lircd and it should work. Go through lirc README and man irrecord carefully. You need to manually chmod 777 /dev/lircd and some other such stuff. I'll mail you a lirc installation and configuration note I had prepared some time back. That might help you. Regards, Kapil -- "The Power to Imagine, is The Power to Create!" -TTux -- ______________________________________________________________________ Pune GNU/Linux Users Group Mailing List: ([email protected]) List Information: http://plug.org.in/mailing-list/listinfo/plug-mail Send 'help' to [EMAIL PROTECTED] for mailing instructions.
