Try lowering the speed of your connection first so you can isolate the
problem.
Start at 19200 on the win95 box.
usually, this is what I do first to isolate ppp connection problems.
> -----Original Message-----
> From: Carlo Sogono [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, April 02, 2000 4:51 PM
> To: [EMAIL PROTECTED]
> Subject: [plug] dialin login problem
>
>
> just recently, i upgraded my slack 3.5 radius/portslave
> server to slack 7. i restored my configuration files (just
> /etc/raddb/* and /etc/portslave/pslave.conf) and recompiled
> both programs from the source (same version of
> radius/portslave as the ones in my slack 3.5). everything
> seemed to be going well, i was able to test radius and
> portslave from the server.
>
> problem: i noticed that when i made a win9x system dial, the
> server would do a handshake but hang...causing both systems
> to timeout. so i tried using a terminal program to dial so i
> could see exactly if the server was putting a login prompt.
> so it did...but i couldn't write anything. anything i type
> wasn't going out to the screen...the cursor just stayed at
> login: _ - i figured it had something to do with my kernel
> char devices so i tried different configurations compiling
> the kernel. wala parin.
>
> added info: when i type at the login prompt, the transmit
> light doesn't light up...i've tested this on 3 different
> win9x machines with different modems.
>
> any ideas?
>
> thanks...
>
> =)
>
> -
> Philippine Linux Users Group. Web site and archives at
http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
-
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
