just a reminder, this will not work if you're testing from the internal
machines. The request should come from the internet.
And btw, if this is your setup, your ipmasqadm command you've shown before
is wrong.
Instead of specifying 10.0.0.1 as the local ip address, specify the ppp0
address. I saw the problem now.
> -----Original Message-----
> From: Ina Patricia Lopez [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 14, 2000 9:17 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [plug] ip masquerading
>
>
>
> i am about to try the instructions ronneil mentioned.
> but 1st here is my setup:
>
> ISP<-----------PPP Linux box<------LAN
>
> ppp0: live IP address (202.100.0.33)
> eth0: private IP address (10.10.0.99)
> workstations : 10.10.0.101 ... 10.10.0.105
> netmask: 255.255.0.0
>
> 1. what should be the gateway of my linux box? should
> it be its own eth0 ?
>
> the gateway of my workstations is the eth0 of my linux
>
> box. is this correct ?
>
> -ina patricia
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Send online invitations with Yahoo! Invites.
> http://invites.yahoo.com
>
> -
> Philippine Linux Users Group. Web site and archives at
http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
-
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
