is the device aliased to the ipw2200 module? i.e. (/etc/modules.conf or /etc/modprobe.conf ) alias eth0 ipw2200
or you might want to preload the module ahead of those listed at /etc/modprobe.conf by invoking the command: shell> mkinitrd --preload=ipw2200 ........ which creates a ramdisk image w/ a preloaded ipw2200 driver module. hth On 3/4/07, Pablo Manalastas <[EMAIL PROTECTED]> wrote:
..... Then came the big disappointment: after rebooting, wireless networking would not work again. The /etc/init.d/network script fails. I suspect that /etc/init.d/network is called before the ipw2200 driver could be loaded. So I did the unforgiveable, and added the following lines to the beginning of /etc/init.d/network if [ "$(lsmod | grep ipw2200)" = "" ]; then modprobe ipw2200 fi This makes sure that the ipw2200 driver is loaded before "ifconfig eth1" is performed. Is there a better way of doing this?
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List [email protected] (#PLUG @ irc.free.net.ph) Read the Guidelines: http://linux.org.ph/lists Searchable Archives: http://archives.free.net.ph
