hi everyone, I would like to ask someone if you have the connection setting for GLOBE Visibility on huiwe e220 usb device, I already solve my usb issue, my modem where already detected. The only thing that I can't connect with the following setting on wvdial.conf
following the setting that Mr Ronald N. Artos for PLDT weroam and the blog for Globe visibility at http://jijo.free.net.ph/25#more I have this seetings on wvdial.conf [Dialer Defaults] Phone = *99# Username = globe Password = globe APN = globe Stupid Mode = 1 [Dialer weroam] #Init1 = ATZ #Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 #Init3 = AT+CFUN=1;+CGDCONT=1,"IP","weroam" Init1 = AT+CFUN=1,1 Init2 = ATZ Init3 = AT+CGQREQ=1,0,0,0,0,0 Init4 = AT+CGQMIN=1,0,0,0,0,0 Init5 = AT+CGDCONT=1,"IP","internet.globe.com.ph","",0,0 Idle Seconds = 3000 Baud = 921600 Stupid Mode = 1 Compuserve = 0 Modem = /dev/ttyUSB0 Auto DNS = 1 Dial Command = ATD Ask Password = 0 ISDN = 0 FlowControl = NOFLOW and with same /etc/ppp/peers/wvdial from Mr. Ronald N Artos refuse-chap refuse-mschap refuse-mschap-v2 refuse-eap plugin passwordfd.so noauth name wvdial defaultroute replacedefaultroute noipdefault novj nobsdcomp usepeerdns updetach modem crtscts lock asyncmap 0 lcp-echo-interval 30 lcp-echo-failure 0 lcp-max-configure 60 lcp-restart 8 ipcp-accept-local ipcp-accept-remote ipcp-no-address ipcp-no-addresses ipcp-max-configure 50 ipcp-restart 8 idle 6000 noipx novj mtu 1456 but I haven't connect to globe have this mesage after wvdial weroam command The PPP deamon has died: A Modem hung up the phone (exit code = 16) Thank you in advance have a nice day. Thank you for Mr. Ronald N Artos for providing the seeting for pldt weroam Im still using it Thank you again. mac borje
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List http://lists.linux.org.ph/mailman/listinfo/plug Searchable Archives: http://archives.free.net.ph
