thank you I have it connected. ~mac
On Fri, Sep 19, 2008 at 5:12 PM, Federico Sevilla III <[EMAIL PROTECTED]> wrote: > Hi Mac, > > For Globe Visibility, AFAIK, the correct details are: > > Phone number: *99***1# > APN: internet.globe.com.ph > > Also, try to remove the extra init scripts that you got from my blog > entry, since those may have only been applicable to the particular modem > I used which wasn't a Huawei E220. The only init script that's really > important is AT+CGDCONT=1,"IP","$APN","",0,0 where $APN is your APN, or > internet.globe.com.ph for Globe Visibility. > > Cheers! > > On Fri, 2008-09-19 at 15:04 +0800, mac borje wrote: > > hi everyone, > > > > I would like to ask someone if you have the connection setting for > > GLOBE Visibility on huiwe e220 usb device, I already solve my usb > > issue, my modem where already detected. The only thing that I can't > > connect with the following setting on wvdial.conf > > > > > > following the setting that Mr Ronald N. Artos for PLDT weroam and the > > blog for Globe visibility at http://jijo.free.net.ph/25#more I have > > this seetings on wvdial.conf > > > > [Dialer Defaults] > > Phone = *99# > > Username = globe > > Password = globe > > APN = globe > > Stupid Mode = 1 > > > > [Dialer weroam] > > #Init1 = ATZ > > #Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 > > #Init3 = AT+CFUN=1;+CGDCONT=1,"IP","weroam" > > Init1 = AT+CFUN=1,1 > > Init2 = ATZ > > Init3 = AT+CGQREQ=1,0,0,0,0,0 > > Init4 = AT+CGQMIN=1,0,0,0,0,0 > > Init5 = AT+CGDCONT=1,"IP","internet.globe.com.ph","",0,0 > > Idle Seconds = 3000 > > Baud = 921600 > > Stupid Mode = 1 > > Compuserve = 0 > > Modem = /dev/ttyUSB0 > > Auto DNS = 1 > > Dial Command = ATD > > Ask Password = 0 > > ISDN = 0 > > FlowControl = NOFLOW > > > > > > > > and with same /etc/ppp/peers/wvdial from Mr. Ronald N Artos > > > > > > refuse-chap > > refuse-mschap > > refuse-mschap-v2 > > refuse-eap > > > > plugin passwordfd.so > > noauth > > name wvdial > > defaultroute > > replacedefaultroute > > noipdefault > > novj > > nobsdcomp > > usepeerdns > > updetach > > modem > > crtscts > > lock > > asyncmap 0 > > lcp-echo-interval 30 > > lcp-echo-failure 0 > > lcp-max-configure 60 > > lcp-restart 8 > > ipcp-accept-local > > ipcp-accept-remote > > ipcp-no-address > > ipcp-no-addresses > > ipcp-max-configure 50 > > ipcp-restart 8 > > idle 6000 > > noipx > > novj > > mtu 1456 > > > > > > > > but I haven't connect to globe have this mesage after wvdial weroam > > command > > > > The PPP deamon has died: A Modem hung up the phone (exit code = 16) > > > > Thank you in advance have a nice day. > > > > Thank you for Mr. Ronald N Artos for providing the seeting for pldt > > weroam Im still using it Thank you again. > > > > mac borje > > > > > > _________________________________________________ > > Philippine Linux Users' Group (PLUG) Mailing List > > http://lists.linux.org.ph/mailman/listinfo/plug > > Searchable Archives: http://archives.free.net.ph > -- > Federico Sevilla III > F S 3 Consulting Inc. > http://www.fs3.ph > > _________________________________________________ > Philippine Linux Users' Group (PLUG) Mailing List > http://lists.linux.org.ph/mailman/listinfo/plug > Searchable Archives: http://archives.free.net.ph >
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List http://lists.linux.org.ph/mailman/listinfo/plug Searchable Archives: http://archives.free.net.ph
