Denis Heidtmann wrote: > Help. > > Sound out has quit on one channel only. That is, system sound test, > audacity, > amarok, and on-line videos all lack output on one channel. The microphone > plugged into the sound card, however, generates output on both channels (as > seen > by ecasignalview). I unplugged the cable to the amp at the sound card and > tested > to ensure that both channels respond, so the problem is not in the hardware > external to the computer. > > ecasignalview shows signal on only one channel (from software sources). > > Kmix has a right/left balance slider. It is set in the middle, but if I move > it > much at all the master volume drops to near zero. Raising the master control > back up restores the working channel output, but the dead channel remains > dead. > > Ideas? > > -Denis
Found this: "I have a 1525n with Kubuntu Hardy (8.04) and to get full volume I have to slide the PCM and/or Front volume sliders from 100% to 0% and back to 100% to get volume on both channels (with the sound only coming out of one channel it is obviously lower in volume). I don't know why this happens and I haven't bothered to find out why..." Works for me too. Do this after every boot?? _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
