I installed a new hard drive on which to install Debian. I had intended to
place the old hard drive in a USB enclosure that I already had. Unfortunately,
the old drive is SATA, and the USB enclosure is not a SATA enclosure. So,
instead I opted to place the old drive in the ultrabay frame that I used for my
500 GB backup drive.
All seemed to go well, but Squeeze is not finding the drive. I get the
following:
j...@devil8:~$ dmesg |tail
[40648.050094] hda: possibly failed opcode: 0xa0
[40648.050100] hda: Strange, packet command initiated yet DRQ isn't asserted
[40648.050326] hda: status error: status=0x51 { DriveReady SeekComplete Error }
[40648.050341] hda: status error: error=0x04 { AbortedCommand }
[40648.050349] hda: possibly failed opcode: 0xa0
[40648.050356] hda: Strange, packet command initiated yet DRQ isn't asserted
[40648.050595] hda: status error: status=0x51 { DriveReady SeekComplete Error }
[40648.050610] hda: status error: error=0x04 { AbortedCommand }
[40648.050618] hda: possibly failed opcode: 0xa0
[40648.050624] hda: Strange, packet command initiated yet DRQ isn't asserted
Can someone offer suggestions?
--
John Jason Jordan <[email protected]>
_______________________________________________
PLUG mailing list
[email protected]
http://lists.pdxlinux.org/mailman/listinfo/plug
