On Mon, 2009-11-02 at 09:56 -0800, John Jason Jordan wrote:
> I installed a new hard drive on which to install Debian. I had intended to
> place the old hard drive in a USB enclosure that I already had.
> Unfortunately, the old drive is SATA, and the USB enclosure is not a SATA
> enclosure. So, instead I opted to place the old drive in the ultrabay frame
> that I used for my 500 GB backup drive.
>
> All seemed to go well, but Squeeze is not finding the drive. I get the
> following:
>
> j...@devil8:~$ dmesg |tail
> [40648.050094] hda: possibly failed opcode: 0xa0
> [40648.050100] hda: Strange, packet command initiated yet DRQ isn't asserted
> [40648.050326] hda: status error: status=0x51 { DriveReady SeekComplete Error
> }
> [40648.050341] hda: status error: error=0x04 { AbortedCommand }
> [40648.050349] hda: possibly failed opcode: 0xa0
> [40648.050356] hda: Strange, packet command initiated yet DRQ isn't asserted
> [40648.050595] hda: status error: status=0x51 { DriveReady SeekComplete Error
> }
> [40648.050610] hda: status error: error=0x04 { AbortedCommand }
> [40648.050618] hda: possibly failed opcode: 0xa0
> [40648.050624] hda: Strange, packet command initiated yet DRQ isn't asserted
>
> Can someone offer suggestions?
>
Everything else being equal..
I would look in BIOS first..
Is the hard drive recognized by the Motherboard??
Double check both ends of the connectors..
HTH
Linux-yug
_______________________________________________
PLUG mailing list
[email protected]
http://lists.pdxlinux.org/mailman/listinfo/plug
