On 11/02/2010 09:25 AM, Richard C. Steffens wrote: > I'm thinking I need to give Network Manager more information. > Specifically, the DNS servers and the Search Domains. A bit of Googling > turned up a Comcast list showing Primary and Secondary DNS servers for > Oregon as 68.87.69.150 and 68.87.85.102. The only thing I could find for > Search Domains is hsd1.fl.comcast.net.
To use Network Manager on Ubuntu 10.04 to change from DHCP to a static IP address do the following: Right click on the Network Manager icon -- it's the square with a dot in the middle and a diagonal line running down and to the left from the bottom left corner of the square. Select "Edit Connections..." from the drop down menu. Select the appropriate NIC from the list (in the current case, that was shown as Auto eth0) and click on the "Edit..." button. In the "Editing Auto eth0" dialog click the "IPv4 Settings" tab. Change "Method" from the "Automatic (DHCP)" entry to the "Manual" entry. Under "Addresses" click the "Add" button. Enter the desired address in the "Address" column, the desired netmask in the "Netmask" column, and the gateway address in the "Gateway" column. Be sure to hit the <enter> key after entering the gateway address. If you click away from it, the address disappears. In my example the addresses are: Address: 192.168.0.253 Netmask: 255.255.255.0 Gateway: 192.168.0.1 Enter the desired DNS server addresses in the "DNS servers:" box, separating each address with a comma. For my example the numbers from Comcast are: 68.87.69.150,68.87.85.102 Enter the desired search domain address in the "Search domains:" box. Again, in my example the search domain from Comcast is: hsd1.fl.comcast.net Next, click the "Apply..." button. You will be asked to authenticate by providing your root password. Finally, to really apply the changes, bring the connection down by clicking (not right clicking) the Network Manager icon and clicking "Disconnect" on the line under the connection you just changed. Then bring the connection back up by clicking the Network Manager icon and clicking on "Auto eth0" or whatever is appropriate for your situation. -- Regards, Dick Steffens _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
