Hey folks! I'm running Fedora Core 13 in VMware Workstation and I'm having a little bit of networking trouble.
I've added a second adapter named eth1 to a dhcp server however it fails to receive an ip address on boot. The boot.log shows "Determining IP information for eth1...failed." After booting the machine I run ifconfig and see only my eth0 adapter. At this point I can do ifconfig eth1 up then stop and restart networking to bring up the eth1 adapter and give it an IP address however this is not an ideal situation. I'd much rather have both adapters be addressed properly at boot. Below is a copy of the config scripts for each interface. Any help spared is much appreciated! Thank you! /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=00:0C:29:D0:53:A7 BOOTPROTO=static ONBOOT=yes IPADDR=10.10.10.10 NETMASK=255.255.255.0 TYPE=Ethernet USERCTL=no IPV6INIT=no DEFROUTE=yes PEERDNS=yes /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 HWADDR=00:0C:29:D0:53:B1 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet USERCTL=no IPV6INIT=no DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=yes NAME="System eth1" _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
